What have you done to your Landie today.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
finished off fitting the extended wheel arch rubbers

spats002.jpg


spats001.jpg


sorted out the couple of light bulbs (n/s/f side light) and rear number plate light.
then found out why me handbrake was u,s, 1 of the link pins was missing so stuck a bolt and lock nut in there so should'nt loose it again.
 
finished off fitting the extended wheel arch rubbers

spats002.jpg


spats001.jpg


sorted out the couple of light bulbs (n/s/f side light) and rear number plate light.
then found out why me handbrake was u,s, 1 of the link pins was missing so stuck a bolt and lock nut in there so should'nt loose it again.

ere bucky that length of marine grade hardwood on yer rear tub near side

whassatt for then :confused::confused:
 
hi guys im after a bit of advice i got my 1999 disco td5 chipped a couple of years ago straight away the clutch was slipping so i fitted a brand new clutch kit then a year later my transfer box went bang so i replaced that with a new reconditioned one 3 months later the transfer box went bang again and destroyed every thing inside the transfer box so i had a garage replace the transfer box as mine was under guarantee now since that has been done i get a juddering mostly when in 3rd gear when at 30mph and about 2000rpm does any one have any ideas on what it could be cheers regards mark
 
I've put my Disco into Autoland for a service and MOT. Drove through the sodding school run to get there! 7 miles in one hour! Oh how I love living in the South East! :mad:
 
its not marine grade it was green oak i had kicking about for years probably harder than the ali type.

just looks to have weathered about the same as marine grade and a damn good personal touch and does look to have that nautical essence to me

and besides i had to ask as with your reputation bucky i seriously thought it was something to attatch some kind of shooting platform to :D:D:D:D
 
BGB thought you had Cooper STT???

I do but a couple of um have a tiny bit of Rock rash. Still got 7-8mm of tread left though.

The main reason was i got the BFG cheap and i needed a set of tyres to go on the mach 5's so i thought id give them a go.

I will report on the difference after sailsbury. :D
 
hi guys im after a bit of advice i got my 1999 disco td5 chipped a couple of years ago straight away the clutch was slipping so i fitted a brand new clutch kit then a year later my transfer box went bang so i replaced that with a new reconditioned one 3 months later the transfer box went bang again and destroyed every thing inside the transfer box so i had a garage replace the transfer box as mine was under guarantee now since that has been done i get a juddering mostly when in 3rd gear when at 30mph and about 2000rpm does any one have any ideas on what it could be cheers regards mark
post it in the disco or general lr chat and you may get more help mate.:)
 
I balanced (Well, Kwik fit did) the wheels on my Defender. Wow! What an improvement. Carrying a lot of lead on some wheels now!
 

Attachments

  • DSCF0573.JPG
    DSCF0573.JPG
    197.1 KB · Views: 144
Put wheels on fender.
wheels2.jpg

wheels1.jpg


And tomorrow:

Fitting the raptor dash and rear fog light i think.

Got a hurry on as im leaving for the states just after salisbury for most of the year :eek: and i have a LOT of bits to fit before i go.
 
Back
Top