What have you done to your Landie today.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Umm really exciting day.. took the carpets out and pressure washed them. 18 months of stable mud/horse**** washed out in a few minutes. Only problem is that I can now see all the water sloshing round in the front footwells :eek::eek::eek:
Anyone got some Disco 1 front rubber mats going really cheap?????
 
as the landy is off the road for now, stripped down the hub etc to sort a leak, then drained the brake fluid and repaired a weeping brake pipe, as its empty of fluid now, any recomendations for re-filling? series 2a diesel
 
bollix again - egr all cleaned, new P gasket fitted, all bolted back. refilling with water - one way valve near coolant bottle broken. can i get anuffa today - can i buggery. have to wait till tomoz, so it mite be new valve, noo rad and noo decat pipe being fitted. :eek:.
 
checked oils to discover my L/H swivel housing is leaking (chrome ball is a tad battered):doh:
and that my power steering pump is also leaking

oh and also cleaned engine to find out where that is leaking
 
Dropped my 110 off at the spray shop. Time for a colour change, never really liked it being white.

071-1.jpg
 
why is it - it never rains, but it pours....?

noo rad, noo t piece and noo rocker box gasket.

easy peasy - tighten up oil cooler pipes - like fook - bottom nut buggered and damaged noo rad thread - back to KG tomoz - more expense :mad:
 
I've fitted a new compressor to the P38, that's the second one in 5 months, though i did tell the bf not to shop at island 4x4, but would he listen :rolleyes:
 
Took the sound deadening out of front footwells. Wish I hadn't as I found bloody great big holes! Spent last 6 hrs welding. Need to by some seam sealant when I get paid...#
 
Still haven't done the P gasket :( - So topped up coolant.

Refitted rear door lock mechanism and adjusted door to close properly for once.

Refitted home made headlight guards.

Fitted Limb risers / bush lifters ..... whatever :D


Thepiglights.jpg
 
Still haven't done the P gasket :( - So topped up coolant.

Refitted rear door lock mechanism and adjusted door to close properly for once.

Refitted home made headlight guards.

Fitted Limb risers / bush lifters ..... whatever :D


Thepiglights.jpg

Sorry for the stupid question but what are the guy-rope things between the lamp guards and light bar for?
 
put new flanges on the rear halfshafts, new nuts and bolts on rear prop shaft, new drain plug on rear axle and re-filled with the oil that arrived today, also put new copper washer on gearbox drain plug, was really looking forward to running her tonight but my dam brake fluid aint arrived :mad:
just wanna be on the road again..!! maybe tomorrow :(
 
Back
Top