Hamsterberg
Well-Known Member
- Posts
- 2,076
- Location
- Essex
sweet, will like to see it finished
When all done and powder coated will post some pics
What have you done to your Landie today.
- Thread starter madfrank
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
When all done and powder coated will post some pics
Loo-knee
New Member
- Posts
- 90
- Location
- Stoke-on-Trent
Messed about with the Drivers central locking motor, fuese etc and still no central locking ah well character building
ah well character building 
Co-Pang-Yang
Well-Known Member
- Posts
- 2,930
- Location
- Colchester, Essex
Really like that roof rack too fella. Gonna hopefully make one for my Disco soon.
Just got in from work to find the 2nd hand passenger seatbelt i had ordered of ebay had arrived in the post, took them 9 days from me paying to actually sending it.
Had a quick look and the fecking thing is jammed solid!
Looks like where they left it to wind all the way in its caused the lock to engage.
Feck sake.
Just got in from work to find the 2nd hand passenger seatbelt i had ordered of ebay had arrived in the post, took them 9 days from me paying to actually sending it.
Had a quick look and the fecking thing is jammed solid!
Looks like where they left it to wind all the way in its caused the lock to engage.
Feck sake.
discoboy84
New Member
- Posts
- 537
- Location
- Ipswich
Really like that roof rack too fella. Gonna hopefully make one for my Disco soon.
Just got in from work to find the 2nd hand passenger seatbelt i had ordered of ebay had arrived in the post, took them 9 days from me paying to actually sending it.
Had a quick look and the fecking thing is jammed solid!
Looks like where they left it to wind all the way in its caused the lock to engage.
Feck sake.
has to be the right way up, or it'll think you've rolled and look just fit it it'll work
Co-Pang-Yang
Well-Known Member
- Posts
- 2,930
- Location
- Colchester, Essex
have got it the right way up, thing don't wanna move for sh1t!
I'll get it bolted in then I can have a proper swearing session on it.
I'll get it bolted in then I can have a proper swearing session on it.
discoboy84
New Member
- Posts
- 537
- Location
- Ipswich
replaced all my rusty rear body crossmember on the disco, welded some box section along under the pillers and then some box feet to the chassis/body mount
now do i refit the bumper?
now do i refit the bumper?
Bigant
Member
- Posts
- 23
- Location
- Stoke on trent
started to strip the donor 110 so i can pull its 200tdi out. started to strip the series 3 ready to fit said engine and discovered that my lower dash is basicly rust and plastic.. anyone know where i might be able to dig another one out from? also stuck the 110s wheels on the ebay. abit more cash to spend on my series then
p38rabbit
New Member
- Posts
- 12
- Location
- BRISTOL....
SHES BACK ON THE ROAD!!!!!BIG THANK TO THE WEBSITE!!!!AND A REALLY BIG THANKS TO "DUGGIE"akaDOGSBODY FOR TAKING SO MUCH TIME OUT TO PUT ME BACK ON THE ROAD!.....""""YOUR A STAR"""""".....CHEERS MATE.
0640 this morning reversed off me drive then wiggled me gearstick to put it in first....while I was doing that the little old lady neighbour with a disco 2 reversed off her drive into my front bumper..then went forwards then reversed again harder !!!!! crrruuunnnch.......i've got a couple of scratches on the end of my bumper she's got no rear light and needs a new bumper !
" i'm really sorry I didnt see you" **** me my camo paint must work really well !!!!!!
she's got no rear light and needs a new bumper !" i'm really sorry I didnt see you" **** me my camo paint must work really well !!!!!!
- Posts
- 67,744
- Location
- halfway between here and there.
0640 this morning reversed off me drive then wiggled me gearstick to put it in first....while I was doing that the little old lady neighbour with a disco 2 reversed off her drive into my front bumper..then went forwards then reversed again harder !!!!! crrruuunnnch.......i've got a couple of scratches on the end of my bumper
" i'm really sorry I didnt see you" **** me my camo paint must work really well !!!!!!
you clumsy git,fancy doing that to a poor old lady.i bet you are gonna make her pay loads of money aren't you.ohhh me neck me neck.compo claim here i come.lol.
Sirus
Your all Banned except me
- Posts
- 22,196
- Location
- The Country of Black
Just cause your missus isn't in to rearending theres no need to take it out on the neighbour
Co-Pang-Yang
Well-Known Member
- Posts
- 2,930
- Location
- Colchester, Essex
Replaced my broken passenger seat belt, should stop my mate bitching about how he keeps bouncing around in cab when offroading. :lol:
finallysnapped
Well-Known Member
- Posts
- 1,127
- Location
- East Lothian
Got it back from the garage and they'd pretty much completely broken the drivers door handle so I took the door apart and sorted that, opens better than ever now though.
RedViper37
New Member
- Posts
- 147
- Location
- isle of wight
fitted my new seat covers
they fit realy well
£28.75p isnt bad eather
LAND ROVER DISCOVERY - TWO SEAT COVERS IN CAMO on eBay (end time 13-Feb-11 13:43:30 GMT)
they fit realy well
£28.75p isnt bad eather
LAND ROVER DISCOVERY - TWO SEAT COVERS IN CAMO on eBay (end time 13-Feb-11 13:43:30 GMT)
td5diagnostics
New Member
- Posts
- 75
diff and transfer box oils....and it was sunny - felt like i should have been in a pub beer garden!
olliebradley
New Member
- Posts
- 55
Fitted LocBox, fuel filler neck and pipes, repaired lights and fitted steering boss and Momo wheel
carl purvis
New Member
- Posts
- 4
Fitted an egr removal kit and started painting a set of steel wheels matt black with a set of 31 10.50 15 colway c trac tyres and a rotel cb and a new gutter mount and ariel!! busy!!!! This is my first discovery 300tdi am 28 and a love it!!!!!!!!!!!!!!! am i fitting the right stuff?
Geep
Active Member
- Posts
- 168
- Location
- North Yorkshire
Popped off into town for new gegs, the dog ate the other ones.
Got back to D'wreck the disco, got out key, looked at it, looked
at it again..... the end had come off!
Tried it in the door lock, no go, had to use the back door key
(different lock), jiggling it to get in, now for ignition.... no way
would it turn.
Had to do a twokkers, wrenched wheel hard to break steering
lock, then take the back of the ignition switch off to start the
bus.
It's been one of those weeks, battery light staying on, replaced
regulator, now key .. what next..they come in threes!
Wondering whether to replace the steering lock or have a start
button......?
Got back to D'wreck the disco, got out key, looked at it, looked
at it again..... the end had come off!
Tried it in the door lock, no go, had to use the back door key
(different lock), jiggling it to get in, now for ignition.... no way
would it turn.
Had to do a twokkers, wrenched wheel hard to break steering
lock, then take the back of the ignition switch off to start the
bus.
It's been one of those weeks, battery light staying on, replaced
regulator, now key .. what next..they come in threes!
Wondering whether to replace the steering lock or have a start
button......?
ratty
I'm not special I'm limited edition
- Posts
- 34,277
:welcome2: to landyzone
I know we don't speak proper English on here but whole sentences do help.
all togehter now **** OFF you trollin ****
