What have you done to your Landie today.

redhand said:

Bobtailed the disco. RobinT reckons there's summat wrong wiv it. But I'm sure I've cut it in the right place..



And decided that if a defender can have a removable transmission tunnel. To make it easier to get at the bell housing bolts. So can a disco..

Click to expand...

Maybe you should tray-front the Fender next

fitted front diff and propshaft. Will fit the axle ends tomorrow or one evening next week!! CBA too fooking wet i got soaking!!

Was a lush day today got a decent amount done and had a look at some mods for the chassis in order to keep the 5 points if they start being picky

Pics and write up to follow

Installed my new 99p ebay mg seats fitted new light and painted and installed new wheels

danny6801 said:

Installed my new 99p ebay mg seats fitted new light and painted and installed new wheels

Click to expand...

Kin'ell theys nice mate.

What about the wheels ??:nopics::nopics::nopics:

Got a shift on again today, body off and started to look at the best place to move the cab back to!

Thinking 1/3rd into the pickup bed leaving a decent amount of space and giving a good amount of extra room inside

So heres the pics (didn't get any in situ ones)

Floor out as well as checker plate bench pieces and crossmember cover (britpart sticker was still on that crossmember)



Tub off




Central slat missing as the fixing was corroded so going to put some angle onto the sides, rivet it in and rivet the slat to that for support





Bottom of the cab off too as the ****ing bastard had welded it to the galv capping :doh: total ####wit given that theres bolt holes there………





Held together with pigeon **** too :doh: and sealant!

Guy welded about 1/4 of it in random spots and used sealant for the rest!







New crossmember fits



Gearbox wrapped up



Looking a bit bare doors tied together in order to support the roof too



Wrapped up now as its gonna rain………

gaylord copy and paste king

everyone likes pics

landowner said:

Kin'ell theys nice mate.

What about the wheels ??:nopics::nopics::nopics:

Click to expand...

Never got round to fit them till it was dark will take some tommorow for you mate.

Started to fit the Radiator and intercooler in to my defender..

Well today I was goin to pressure wash the underside of the disco, find out why the TC, ABS and HDC lights come on every now and again and ave a look at me rear susy bags and ride height sensor coz me arse drags the bump stops when the engine aint runnin,sometimes, but its ferkin snowin so bowlocks to that I'll be in me workshop re-buildin me TR.

Spent the last couple of days cruising around the Isle of Wight in mine. Got flagged down by a couple last night who were driving a vw camper van on Brading down and had got their vehicle bogged when trying to turn it around.

Van came out a piece of p*** but I noticed the nearside front wheel was a little noisey when I was reversing.

New discs, pads and dust shields are now on order.

redhand said:

Fitted a "BuryTake&talk" Bluetooth enabled handsfree fone kit, for me blackberry, even auto mutes the radio, when using the fone. gonna be so nice to be able to talk to the AA without having to hold me fone in me hand..

Click to expand...

Bury??

Does it add t' to words?

I seem to have broken my gearbox as it's stuck in gear (3rd I think)

ground off part of my air filter housing so it wouldnt split my top rad hose again

Measured up the rear tub for repair panels, tub needs extensive repairs, rivet gun on order to fix it and measurements made.

Had an idea for the cab spacing too

New stereo and recovered my side panels then fitted new speakers in them too.

Why is nothing is ever simple!!!! Especially with Landys!

Went to fit bucket seats in today. Then realised I have to weld some box section in for some actual support.

The rear still ####ing leaks! Even after sorting it all out, i have some to the solution there must be a hole in the roof.

**** loads of water has flooded in at the back passanger side, also round some broken rivets.

On the plus side test fit my new bucket and it gave wayyy more space! But the side bolsters are a little too narrow for me, so put a load of weights and LR magazines to 'widen' it a little bit.

today i had lots of fun in the snow in my series 3 even took the wife in it shes not inpressed .
when we got home i pressure washed it alloffnow it back in it heated workshop

today i played with it down some greenlanes, then took it home and shoved a new rear exhaust section on it. (a right pita...)