thought it was mine!
New Member
- Posts
- 8,236
Watch wife take it off me.
What have you done to your Landie today.
- Thread starter madfrank
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
DEFENDER90-DAZ
New Member
- Posts
- 3,239
- Location
- Scotland - Houston
Fitted my emergency hammer 
Hopefully i won't need to use it
Hopefully i won't need to use it
- Posts
- 83,232
- Location
- Embasinga stocæ
Got the heater n air con working. fitted the CB (bad SWR tho) and loaded the boot with tools.
baggyjim
New Member
- Posts
- 2,063
- Location
- gillingham dorset
loaded up with bits and pieces ready for tomorrow, fixed wiper arm back on (bloody ****part) also fitted new HT leads on monday
ratty
I'm not special I'm limited edition
- Posts
- 34,277
Fixed the door lock on mine and then pulled one of the wires out of my multi-meter. I pulled it apart and re-soldered it...... and then went to test it on the jump socket on my landy...... Maybe putting the bare circuit board on top of my metal bumper while testing it wasn't the brightest thing to do......:doh::doh::doh:
I'll be ordering a new one over the weekend.
I went to fit the central locking kit and it ****ed down with rain. I went to fit the new door clips I bought on ebay...and found they were the wrong ones.
I then decided that I best go back indoors before I did some real damage.
I'll be ordering a new one over the weekend.
I went to fit the central locking kit and it ****ed down with rain. I went to fit the new door clips I bought on ebay...and found they were the wrong ones.
I then decided that I best go back indoors before I did some real damage.
- Posts
- 83,232
- Location
- Embasinga stocæ
Muppet
thought it was mine!
New Member
- Posts
- 8,236
and i took you advise might being thinking twice about your valuable replies:doh:
andlover
New Member
- Posts
- 265
- Location
- finland (here where santa lives)
fixed rrc drivers door hinge, and found some rust in body, scrathed it clean and prepared for tomorrow welding evening
blue beasty
Leaks an prone to bits dropping off
- Posts
- 61,253
- Location
- Gloucestercotshirewolds
See my 'Mad Axeman' Fred
ratty
I'm not special I'm limited edition
- Posts
- 34,277
Have you found a new one yet?
blue beasty
Leaks an prone to bits dropping off
- Posts
- 61,253
- Location
- Gloucestercotshirewolds
Nope.....used perspex as an emergency measure for this weekend. Hoping to scoop the 'Tattiest Landy on the Plains' prize.......Reckon I'm in with a shout
ratty
I'm not special I'm limited edition
- Posts
- 34,277
was your original one heated?
blue beasty
Leaks an prone to bits dropping off
- Posts
- 61,253
- Location
- Gloucestercotshirewolds
ratty
I'm not special I'm limited edition
- Posts
- 34,277
Is it the same size as a defender one?
you reccon
blue beasty
Leaks an prone to bits dropping off
- Posts
- 61,253
- Location
- Gloucestercotshirewolds
Dont know.......cant find any ref with a search. Was gonna make some calls today but it was to hectic at school and didn't get a break all day. Doors fit but dont know if the glass is the same
ratty
I'm not special I'm limited edition
- Posts
- 34,277
Dont know.......cant find any ref with a search. Was gonna make some calls today but it was to hectic at school and didn't get a break all day. Doors fit but dont know if the glass is the same
Are you saying that a defender rear door will fit?
blue beasty
Leaks an prone to bits dropping off
- Posts
- 61,253
- Location
- Gloucestercotshirewolds
blue beasty
Leaks an prone to bits dropping off
- Posts
- 61,253
- Location
- Gloucestercotshirewolds
Er.....maybe not but according to past wisdom here a 90/110 will
