What have you done to your Freelander today

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Clutch biting point was getting lower and lower and have been struggling to get it in gear at times so I changed the clutch master cylinder. What a transformation! Biting point is now halfway up and all is well. Just hope that it lasts...

Didn't even need to bleed it :)
 
Looked at my Diff breather today and i do think its not blocked i then took my tweeters out of the trim and cleaned the connectors which made them both start working

next is to buy a Air Con re-gas kit from halfords
 
Replaced the NSR window regulator (I tried replacing the cables but never again..clearly beyond my basic skills!!). All items back up and running 100%. Awaiting for the next failure....hmmm..I wonder what it could be..:rolleyes:
 
I fitted a Kenwood CD/Radio in place of the existing Cassette/Radio unit :mil23: It was going without a hitch having first fabricated two unit removal tools from a wire coat hanger resulting in triumphant removal...then discovering that the aerial was some daft bleddin' k 'banjo' fitting that required a second visit to Halfords for a suitable adaptor.
Nonetheless for that, job done...Trance music sampled at a suitable volume and one happy bunny at the wheel. Still have to resolve the dashboard clock issue and a lagging ABS warning light but with some decent Trance now rattling the interior I'll take such additional niggles in m'stride ;)
 
bobbzie said:
I fitted a Kenwood CD/Radio in place of the existing Cassette/Radio unit :mil23: It was going without a hitch having first fabricated two unit removal tools from a wire coat hanger resulting in triumphant removal...then discovering that the aerial was some daft bleddin' k 'banjo' fitting that required a second visit to Halfords for a suitable adaptor.
Nonetheless for that, job done...Trance music sampled at a suitable volume and one happy bunny at the wheel. Still have to resolve the dashboard clock issue and a lagging ABS warning light but with some decent Trance now rattling the interior I'll take such additional niggles in m'stride ;)
Click to expand...

The "K banjo" fitting ....is it like this ? coz that's an adapter too - you might have put an adapter onto an adapter like I did til I realised.
 

Attachments

  • 007.JPG
    007.JPG
    40.6 KB · Views: 178
Fitted new rear silencer. Got it of 4x4 parts.co.ul as it said it was land rover brand. When it arrived it was a bosal. So not too happy about that.
 
Irishrover said:
Bosal make the exhaust systems for LR.
LR do not have their own factory for manufacturing exhausts, nuts & bolts, plastic trim, batteries, brakes, seats etc. etc.-they buy them in.:eek::eek:
Click to expand...

I don't think that is correct.
If they did make the LR exhaust? the over the counter Bosal stuff is much lower quality. Iirc the factory exhaust system was made in the UK but the company went bust after Rover failed.
 
Last edited:
Stripped half of the engine down to remove what I hope to be a leaking high pressure fuel pump:eek:

Hopefully new one will sort diesel in oil problem.:(
 
You must log in or register to reply here.

Similar threads

B
Freelander 1 Freelander prop bearings replacement td4
Replies
15
Views
548
andyfreelandy
andyfreelandy
O
Freelander 2 diff removal
Replies
7
Views
277
Nodge68
Nodge68
andyfreelandy
Other New Project starting today
Replies
3
Views
292
Alibro
Alibro
P
2006 Facelift TD4 Auto turbo vacuum boost solenoid
Replies
11
Views
511
andyfreelandy
andyfreelandy
P
Freelander 2 4wd problems
Replies
3
Views
636
pauld2296
P
Back
Top