What have you done to your Freelander today

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Took off front rocker cover, cleaned gauze, replaced gasket, put cover back on, realised I'd forgotten to put the gauzes back in :doh:, took it off again! Luckilly the gasket still looked ok (only 9nm torque!).

Broke the breather pipe that runs between the rocker covers and the intake - fixed with insulating tape while I find another.

Then noticed that the T from the other breather pipe (nearest to the oil filler cap) seems to stop abruptly after about 3-4 inches. Is this right? Isn't it supposed to be connected to something?

[edit] This is the one which seems to go nowhere [/edit]
 
Last edited:
Fitted the passenger seat heater today as it arrived today. Thanks to DD3 for the idea of using zip ties for re-fastening the fabric to the foam so so much easier. Just going to order the under seat relay for it now. :)
 
Well a trip to a local breakers was on today!

returned with:
New maf Meter (complete with Pierburgh maf!)
Inlet manifold and EGR (currently soaking in Mr Muscle)
Rear roller parcel shelf - wrong colour but currently drying after first coat of satin black!
Front centre overhead light cluster (my map lights are fooked)
Passenger side roof grab handle end cover.

the lot cost me all of £40!

(great when you find an old mate works there!)

Finish cleaning inlet and EGR tonight then i might have half a chance of swapping them out tommorrow!
 
2000 L series 5 door - replaced the air filter to turbo pipe with silicon elbows and an ali T piece (for the oil breather) per various L series tuning comments on removing the corrugated flexi OE tube.

Marginal but still positive noticeable difference in pickup, so possibly worth the 30-ish quid cost long term.

Ordered new front shocks to see if this stops the front end clunking!!!

Added 200ml of 2-stroke oil to a tankful of diesel to see if there really is a difference. Not sure if there is a result - seems to run smoother and a little quieter, but might be my imagination.

More work tomorrow - EGR blanking, new first gear sensor switch (original one broken causing HDC amber warning light (I think!!)
 
56749F4D-483F-421D-B7D4-ECF463A3DAD3-595-0000004C4284D642.jpg


Brand new tear drop side steps off fleabay, paid £66, fitted near side tonight. Look great for the money, well pleased.
 
Chrome indicator bulbs are the nuts, I've bought them for every car I've owned!!! If you're owt like me, you'll probably want some Bosch flat wiper blades next!?!? Have you got a link for the freelander chrome bulbs??
Cheers dude
 
I'll get a day time pic when I'm finished tomorrow, all my pics of the freelander seem to be on a night time, mad that!!
Can't wait to get the second one!
 
AKeeNShoT said:
Chrome indicator bulbs are the nuts, I've bought them for every car I've owned!!! If you're owt like me, you'll probably want some Bosch flat wiper blades next!?!? Have you got a link for the freelander chrome bulbs??
Cheers dude
Click to expand...


Erm dunt think they're actual freelander bulbs they fit other Chavvy type hair dresser's motors, as well.
 
AKeeNShoT said:
Chrome indicator bulbs are the nuts, I've bought them for every car I've owned!!! If you're owt like me, you'll probably want some Bosch flat wiper blades next!?!? Have you got a link for the freelander chrome bulbs??
Cheers dude
Click to expand...

got them off amazon,

im fitting the front and rear chrome ones in the morning


oh...i aint no chav
 
Last edited:
Just ordered some off fleabay, for 3quid, when I fit them I'll put some pics up to stop the haters hating. Even if people don't like to mess about with cars, they will when the see these. Aesthetically, the difference is immense and definitely a lot better! Where can I get the clips that hold the access panel in, as one of them shot into the engine somewhere when I pushed it in to check the bulb fitment???
 
Just bled the clutch through!
Wife lost all gears whilst out.
when bled there was a crap load of gunk came out!
something tells be the fluid has at some point got low and dirt/dust had ingressed before it was topped up!

anyway clutch ok for now but will keep an eye on it!
 
AKeeNShoT said:
when I fit them I'll put some pics up to stop the haters hating. Even if people don't like to mess about with cars, they will when the see these. Aesthetically, the difference is immense and definitely a lot better! [\QUOTE]

Just had a look at them, don't like them. And yes my freelander is modified.

Dunc
Click to expand...
 
Fitted a heavy duty flasher relay. Took about 10s. But an enjoyable 10sec. Just waiting for my strip of LEDs to arrive so that I can light up the boot when I open the back door.
 
You must log in or register to reply here.

Similar threads

B
Freelander 1 Freelander prop bearings replacement td4
Replies
15
Views
664
andyfreelandy
andyfreelandy
O
Freelander 2 diff removal
Replies
7
Views
412
Nodge68
Nodge68
andyfreelandy
Other New Project starting today
Replies
3
Views
373
Alibro
Alibro
S
Exhaust routing
Replies
2
Views
209
sprie
S
P
2006 Facelift TD4 Auto turbo vacuum boost solenoid
Replies
11
Views
655
andyfreelandy
andyfreelandy
Back
Top