Litch
Well-Known Member
- Posts
- 2,235
- Location
- Oxfordshire
Washed it ready for my agreed value photos (which I will take at the weekend).
What have you done on your 90/110/130 today?
- Thread starter neilly
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
doriz
Well-Known Member
- Posts
- 16,782
Eh, you slipping cooking oil through yer system?
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
Hicap phill
Well-Known Member
- Posts
- 15,381
- Location
- Wiltshire
Drove it to work. Used the wipers & lights.
Then went home got in the S1 & must remember it only has 4 gears
Huddy84
Well-Known Member
- Posts
- 746
- Location
- East Anglia
Commuted in mine today, running nicely as always.
callisr
Well-Known Member
- Posts
- 615
- Location
- Burton-on-Trent, Staffs
I got annoyed with mine and spat my dummy out!
Been trying to sort out all my additional wiring, along with adding some for a leccy fan and also an led light bar for the roof (mahoosive and provided very kindly by Mr @Marmaduke). Ended up changing the alternator as the smoke escaped from mine. Need to reduce the maximum current load.......
Been trying to sort out all my additional wiring, along with adding some for a leccy fan and also an led light bar for the roof (mahoosive and provided very kindly by Mr @Marmaduke). Ended up changing the alternator as the smoke escaped from mine. Need to reduce the maximum current load.......
Marmaduke
Well-Known Member
- Posts
- 9,773
- Location
- Near the land of 'Me Duck'
Another reason to buy a discoveryI got annoyed with mine and spat my dummy out!
Been trying to sort out all my additional wiring, along with adding some for a leccy fan and also an led light bar for the roof (mahoosive and provided very kindly by Mr @Marmaduke). Ended up changing the alternator as the smoke escaped from mine. Need to reduce the maximum current load.......
ChrisBduck
Well-Known Member
- Posts
- 270
- Location
- Bucks
Took out the homemade gearbox tunnel and started to fit the new (2nd hand) one just brought from fleabay, only to find I need new floor panels as previous owner had cut the originals to fit bodged box shape diy cover.
Seems everytime I touch my Landy I end up needing to buy/fix something else.
Seems everytime I touch my Landy I end up needing to buy/fix something else.
Marmaduke
Well-Known Member
- Posts
- 9,773
- Location
- Near the land of 'Me Duck'
I bought 50 litres from asda on Monday for £3.75 per 5 litres cos the price has gone up at tesco
mick the builder
Well-Known Member
- Posts
- 5,901
- Location
- Sligo,Wild West of Ireland.
Swapped the self park switch from my old 110 to my very soon to be tested 300tdi and hey presto, the wipers stop at the bottom. Cheap fix. Tomorrow its down to local garage with a headlight beam height measuring machine and then should be all ready for test.
callisr
Well-Known Member
- Posts
- 615
- Location
- Burton-on-Trent, Staffs
Another reason to buy a discovery
Today I took the DISCOVERY transfer box off my 90 because it has shamed itself and peed oil out since I fitted it a couple months ago. It’s the only leak on my 90!!!
Front output housing and the seals and joints on it are all replaced / remade. When I get back from the pub I will do the intermediate shaft then glue the inspection cover on. It’ll be ready to refit tomorrow unless I get drunk!!
owas
Well-Known Member
- Posts
- 1,213
I bought 50 litres from asda on Monday for £3.75 per 5 litres cos the price has gone up at tesco
Asian place by me is doing 2 1 liter bottles for £1, im going to go clear them out tomorrow
50/50 is the max I'll go I think
Marmaduke
Well-Known Member
- Posts
- 9,773
- Location
- Near the land of 'Me Duck'
You told me that you'd nicked the seal putting it togetherToday I took the DISCOVERY transfer box off my 90 because it has shamed itself and peed oil out since I fitted it a couple months ago. It’s the only leak on my 90!!!
Front output housing and the seals and joints on it are all replaced / remade. When I get back from the pub I will do the intermediate shaft then glue the inspection cover on. It’ll be ready to refit tomorrow unless I get drunk!!
Pappasmurf
Well-Known Member
- Posts
- 633
- Location
- Barnsley
Fitted sound deadening to the transmission tunnel and the central part of the bulkhead. Also did a bit of body adjustment to get the door gaps right, and fitted a Wolf style step at the back door.
- Posts
- 9,018
- Location
- North Lincs
I checked to see why the temperature gauge is going straight to boiling and the secondary gauge on the lower pipe is reading as expected.
The wire seems to have been made up of several short pieces and crimped together with inappropriate connectors...
I have replaced with a single piece connection and all is good now
I just need to work out why the diff lock light is not working......
The wire seems to have been made up of several short pieces and crimped together with inappropriate connectors...
I have replaced with a single piece connection and all is good now
I just need to work out why the diff lock light is not working......
callisr
Well-Known Member
- Posts
- 615
- Location
- Burton-on-Trent, Staffs
You told me that you'd nicked the seal putting it together
It was ok. The leaks were from the intermediate shaft, front flange seal and the joint between the main housing and the front output housing.
Got it finished (finally) today. Tested and so far so good!
Also made a start with fitting my CB
doriz
Well-Known Member
- Posts
- 16,782
Fitted a swing away wheel carrier today, nearly killed me in this heat
Marmaduke
Well-Known Member
- Posts
- 9,773
- Location
- Near the land of 'Me Duck'
Similar threads
