What engine have I got here?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

rugbynut129

Member
Posts
80
Had my lightweight for a while now and really need to know what engine is in it and year if possible ? As I intend on rebuilding it . I know it's a 2.5 ltr and in n/a
 

Attachments

  • image.jpg
    image.jpg
    261.3 KB · Views: 352
Last edited:
Had my lightweight for a while now and really need to know what engine is in it and year if possible ? As I intend on rebuilding it . I know it's a 2.5 ltr and in n/a


Introduce yourself section at the top of LZ homepage does exactly what it says on the tin!;) :rolleyes:


Diesel 2.5 na . If you intend to rebuild it you will need to find the engine number.
 
Last edited:
Cool I have checked the engine number and its a 12j just wondering if anyone knows if this could be have a turbo put on? Or is it just a lot more work for not much benifit?
Thanks
 
Cool I have checked the engine number and its a 12j just wondering if anyone knows if this could be have a turbo put on? Or is it just a lot more work for not much benifit?
Thanks
I don't think it would be a good idea. The standard 2.5 n/a should be able to propel your landy up to 55/60 without a problem - that's about the safe limit your braking system was designed for. The increased stress on the existing 2.5 may cause problems down the line. If you want loads more power a 200TDI conversion would be a better way to go - but don't forget to upgrade the brakes too.
 
19J was basically a turbo strap on to the 12J - BUT - it did have bores done as well to allow for the extra, so sticking a turbo on would be a short life sentence in my book. 19J turbo taken off fine -12J turbo added on - not good.
 
19J was basically a turbo strap on to the 12J - BUT - it did have bores done as well to allow for the extra, so sticking a turbo on would be a short life sentence in my book. 19J turbo taken off fine -12J turbo added on - not good.

they fitted teflon coated pistons after the non coated as 2.5na had a habit of splitting, plus thicker exhaust valves
 
Back
Top