gold rover
Well-Known Member
- Posts
- 10,132
- Location
- Scotland,
Just wanted to say thanks. You going to my old house has worked.Ah ok, I'll let you know tomorrow
What did you do with your Range Rover today
- Thread starter Dopey
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Datatek
Well-Known Member
- Posts
- 43,956
- Location
- Near Poitiers SW France
Project P38 has developed an electrical fault, message centre flashing on and off, ditto battery warning light, aircon compressor clutch dropping out. Fuse box or a bad connection? Time will tell, no time to look at the moment.
23108924
Well-Known Member
- Posts
- 129
- Location
- Shropshire
Still no word from the garage about Honey. No news is good news right...?
Datatek
Well-Known Member
- Posts
- 43,956
- Location
- Near Poitiers SW France
- Posts
- 18,965
- Location
- Buckinghamshire, UK. ('95 DT)
No news means they are still adding to the bill
Probably run out of ink.
Datatek
Well-Known Member
- Posts
- 43,956
- Location
- Near Poitiers SW France
LOL
- Posts
- 4,459
- Location
- Rotherham
Shouldn't you be giving the guy some encouragement
By the way can do a good deal on ink cartridges
Datatek
Well-Known Member
- Posts
- 43,956
- Location
- Near Poitiers SW France
23108924 is femaleShouldn't you be giving the guy some encouragement
By the way can do a good deal on ink cartridges
- Posts
- 4,459
- Location
- Rotherham
Whoops sorry must pay more attention. I always put my foot in it
- Posts
- 5,698
- Location
- North Manchester
Just wanted to say thanks. You going to my old house has worked.
The bill for the fuel is in the post
gold rover
Well-Known Member
- Posts
- 10,132
- Location
- Scotland,
No worries, I can pay in cake or jelly babies. Or a combination of bothThe bill for the fuel is in the post
- Posts
- 5,698
- Location
- North Manchester
- Posts
- 31,416
- Location
- North Shropshire
Replaced the top hose, got myself drenched in coolant.
Put the radiator cowl back on and flush the radiator while it was off
Put the radiator cowl back on and flush the radiator while it was off
Datatek
Well-Known Member
- Posts
- 43,956
- Location
- Near Poitiers SW France
Got round to looking at the problem today, turned out to be the alternator. A bit annoying as it's only a year since I fitted a new regulator and gave it a bit of an overhaul. Looks like the new cheapo regulator is what has failed, I'll find our for sure when I take it apart.
RangeRoller dt
Well-Sprung Member
- Posts
- 14,263
- Location
- Trapped inside my head @ LZ asylum
Been away visiting friends for a week. Don’t think Princess wanted to come home - bottom rad hose seems to have distorted and rubbed against V.fan. My roadside repair kept me going by cutting the broken bit out and zipping bit of pipe in there. my bottle of ‘hot start’ saved me again new hose ESR3165/pch124720 ordered. £8
Only to have something from underneath fly off down the road ... another temporary roadside repair (zip ties) got me home
@Mark Piercy - this will make you grin
Used to be bolted on the bottom gonna try get a friend to weld a bolt on the end for me
Been atleast a week since it broke down last so I’m doing okay
new hose ESR3165/pch124720 ordered. £8Only to have something from underneath fly off down the road
... another temporary roadside repair (zip ties) got me home@Mark Piercy - this will make you grin
Used to be bolted on the bottom
gonna try get a friend to weld a bolt on the end for meBeen atleast a week since it broke down last so I’m doing okay
Last edited:
Datatek
Well-Known Member
- Posts
- 43,956
- Location
- Near Poitiers SW France
You have some serious rust under thereBeen away visiting friends for a week. Don’t think Princess wanted to come home - bottom rad hose seems to have distorted and rubbed against V.fan. My roadside repair kept me going by cutting the broken bit out and zipping bit of pipe in there. my bottle of ‘hot start’ saved me again
View attachment 184541
Only to have something from underneath fly off down the road
@Mark Piercy - this will make you grin
View attachment 184543
Used to be bolted on the bottom
Been atleast a week since it broke down last so I’m doing okay
- Posts
- 18,965
- Location
- Buckinghamshire, UK. ('95 DT)
You have some serious rust under there
Yeah, that's what I was thinking.
23108924
Well-Known Member
- Posts
- 129
- Location
- Shropshire
Two weeks and still no word from the garage. Someone mentioned whole sale printer ink...?
RangeRoller dt
Well-Sprung Member
- Posts
- 14,263
- Location
- Trapped inside my head @ LZ asylum
You have some serious rust under there
I don’t think it’s that bad but don’t listen to me
Photo maybe?? other bits were worse and cleaned up okay with a grind and paint. It is all over the surface but not penetrated - back end around that area is worst. Original idea was to sort out underneath this summer before it turns into a defender
breakdowns every other week has kept me to busy but I have done few little bits. Il get some better pics for you both when I’m under there with the shock(s), see what you think
My mate told me his welder has blown doing his triumph herald (he also has 2Discos and used to have a Classic that he put a CAT engine in, that was then stolen never to be seen again)
He said not to weld struts as when it was originally welded it wasn’t full of oil/nitrogen. Either it will go off in my face like a bomb or the seals inside will fail
He also gave me something (free) to try. I don’t usually believe/mess about with this sorta thing and doubt a P38 will recognise it. Il try just to kill phil’s curiosity -
