What did you do with your Range Rover today

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Scotiawhiskers said:
Ran Otto at the weekend after disconnecting the EAS blue hose - compressor definitely not doing it's thing. Compressor off and stripped, can't see anything wrong, although after only about 100 miles the piston to barrel seems pretty loose and I'm sure it shouldn't be. Replaced the HP side O ring and checked the reeds - register marks and scoring, wondering if they are allowing pressure to damage the new seal instead of build and go into the system.
Plugged it back into the box, forced the pump with the nanocom, output still rubbish,
Thinking a cheapo pump to replace it and keep woring away. Maybe get some feeler gauges and cut myself some new reeds as a check. At least a piston seal / cylinder kit is only about £25 but done that twice already....
Click to expand...

PM Kurt. End of.
 
Scotiawhiskers said:
Ran Otto at the weekend after disconnecting the EAS blue hose - compressor definitely not doing it's thing. Compressor off and stripped, can't see anything wrong, although after only about 100 miles the piston to barrel seems pretty loose and I'm sure it shouldn't be. Replaced the HP side O ring and checked the reeds - register marks and scoring, wondering if they are allowing pressure to damage the new seal instead of build and go into the system.
Plugged it back into the box, forced the pump with the nanocom, output still rubbish,
Thinking a cheapo pump to replace it and keep woring away. Maybe get some feeler gauges and cut myself some new reeds as a check. At least a piston seal / cylinder kit is only about £25 but done that twice already....
Click to expand...
Check with William in Lincoln. I'm guessing he'll likely have tested units on the shelf for next day delivery. His mobile: 07903167575
Mike
 
Scotiawhiskers said:
Ran Otto at the weekend after disconnecting the EAS blue hose - compressor definitely not doing it's thing. Compressor off and stripped, can't see anything wrong, although after only about 100 miles the piston to barrel seems pretty loose and I'm sure it shouldn't be. Replaced the HP side O ring and checked the reeds - register marks and scoring, wondering if they are allowing pressure to damage the new seal instead of build and go into the system.
Plugged it back into the box, forced the pump with the nanocom, output still rubbish,
Thinking a cheapo pump to replace it and keep woring away. Maybe get some feeler gauges and cut myself some new reeds as a check. At least a piston seal / cylinder kit is only about £25 but done that twice already....
Click to expand...
If the compressor is feeding a leak it will fail very quickly.
 
Well it pasted with a couple a bit to sort out, the rear center brake light has a few out and the tyres need changing soon, happy bunny with all the work i have done on it over the last couple of years there was not going to be anything mechanical and it was noted all the new bits.
 
brianp38dse said:
Well it pasted with a couple a bit to sort out, the rear center brake light has a few out and the tyres need changing soon, happy bunny with all the work i have done on it over the last couple of years there was not going to be anything mechanical and it was noted all the new bits.
Click to expand...

I have a rear centre unit but you will have to get it off the car.
 
275665804_10159850903128571_8539518701974498329_n.jpg
 
You must log in or register to reply here.

Similar threads

P
Loss of coolant - 2008 Range Rover
2
Replies
27
Views
1K
Parkheadbhoy
P
D
How do you clean your engine and bay??
Replies
10
Views
357
Tirran
Tirran
RobV8Defender
1990 Range Rover Classic Dashboard Scratches
Replies
4
Views
356
RobV8Defender
RobV8Defender
Spridget
L405 Airbag light
Replies
7
Views
1K
myfirstl322
M
rebeccaSP91
Range Rover vogue stuck in low range UPDATE
Replies
4
Views
974
Mark Piercy
Mark Piercy
Back
Top