Jon Dor
Well-Known Member
- Posts
- 1,672
- Location
- Beverley, East Riding of Yorkshire
What did you do with your Range Rover today
- Thread starter Dopey
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
RangeRoller dt
Well-Sprung Member
- Posts
- 14,273
- Location
- Trapped inside my head @ LZ asylum
Did you build it on top of the other one like I said?
I know it saves lot of space. My father did it went3 stories. Uncle said it would blow over in a year. 30 years later after my father died took 3 men 2 weeks just to get it down to ground level. Only then they realised he’d gone down too
- Posts
- 4,477
- Location
- Rotherham
We've all been there one time or another. Chin upBeen faffing about the last couple of days trying to fit new seals and bearings to the front hubs on Buttercup. Only 3/4 way through one side at the moment cos I have lost confidence in what I am doing regarding fitting the new seals.
I was so chuffed that everything came apart, no seized bolts, that I forgot to take notes on seal depths as I took them out. Now have created a new thread asking for help.
Bummer
- Posts
- 31,591
- Location
- North Shropshire
The other side is the same . I should sort that while the top is offBloody hell
- Posts
- 4,477
- Location
- Rotherham
B*ll*cks eldest son paid a visit Friday then phoned a few hours later he had just tested positive for covid. Today the good lady is laid up feeling absolutely crap. Will try and do a test later but looks like going to be stuck around the house for a few days
frog hopper
Well-Known Member
- Posts
- 4,710
- Location
- france
B*ll*cks eldest son paid a visit Friday then phoned a few hours later he had just tested positive for covid. Today the good lady is laid up feeling absolutely crap. Will try and do a test later but looks like going to be stuck around the house for a few days
- Posts
- 31,591
- Location
- North Shropshire
The rocker shaft i fitted yesterday is wrong. New thread to follow...
frog hopper
Well-Known Member
- Posts
- 4,710
- Location
- france
- Posts
- 31,591
- Location
- North Shropshire
If i didn't laugh, I'd cryYou do go to extreme lengths to amuse us don't you.
Datatek
Well-Known Member
- Posts
- 44,063
- Location
- Near Poitiers SW France
Sorry to hear that, all triple jabbed no doubt with what is proving to be an absolutely useless vaccine.B*ll*cks eldest son paid a visit Friday then phoned a few hours later he had just tested positive for covid. Today the good lady is laid up feeling absolutely crap. Will try and do a test later but looks like going to be stuck around the house for a few days
Jon Dor
Well-Known Member
- Posts
- 1,672
- Location
- Beverley, East Riding of Yorkshire
Not good John. Hope they both fully recover post haste.B*ll*cks eldest son paid a visit Friday then phoned a few hours later he had just tested positive for covid. Today the good lady is laid up feeling absolutely crap. Will try and do a test later but looks like going to be stuck around the house for a few days
- Posts
- 4,477
- Location
- Rotherham
Cheers Keith Eldest has had covid and all his jabs and is feeling a bit off it as is his wife. My wife has had all jabs but hasn't had covid (she has now) and is feeling dog rough. Just have to keep an eye on her.
- Posts
- 4,477
- Location
- Rotherham
Thanks Mike
Scotiawhiskers
Well-Known Member
- Posts
- 842
- Location
- Manchester
One left, one right each cylinder. If they are the wrong way round (face to face or back to back, can't remember which is right) then the pad doesn't sit over the valve stem. Right way round they do. I 'think' it was with the dimples further apart not closer together on Otto.
- Posts
- 31,591
- Location
- North Shropshire
Struggled yesterday getting the exhaust manifold to line up.. may need to remove an exhaust rubber further down the line to get some movement
Datatek
Well-Known Member
- Posts
- 44,063
- Location
- Near Poitiers SW France
More evidence that the jab is useless against the current variants. My grandson and his girlfriend have just had Covid, he 1 jab a long time ago, she 3 jabs, guess who was the sickest?
Hope you all get well soon.
stuu
Well-Known Member
- Posts
- 1,866
- Location
- Aberdeenshire
Got oil and filter and a new sump bolt since it looks like its started doing land rover things now so I'll probably do that tonight,
- Posts
- 31,591
- Location
- North Shropshire
All back and running.. not burped yet
RangeRoller dt
Well-Sprung Member
- Posts
- 14,273
- Location
- Trapped inside my head @ LZ asylum
Intercooler soaking revealed small leak where the airways join the end tank. Epoxy resined up looks good job too. Last time I used the tub was when I stuck that glow plug back together few years back so no idea of integrity. Aired out, refitted and put one of the new hoses on, monster of a size and very tight fit compared to standard. Jubilees only just expanded enough.
Changed few spills for the gates stuff off Alan. Superb stuff Flossie-pipe is a must for diesel owners imo.
Had a sort of clanging lately like front exh pipe is loose? Obviously pipe is okay, looked underneath at the exhaust manifold area - all looks clean so guessing that’s not leaking. Only other thing can think of in that area is the dmf
Win for today finish putting it back together tomorrow
Changed few spills for the gates stuff off Alan. Superb stuff Flossie-pipe is a must for diesel owners imo.
Had a sort of clanging lately like front exh pipe is loose? Obviously pipe is okay, looked underneath at the exhaust manifold area - all looks clean so guessing that’s not leaking. Only other thing can think of in that area is the dmf
Win for today finish putting it back together tomorrow
Jon Dor
Well-Known Member
- Posts
- 1,672
- Location
- Beverley, East Riding of Yorkshire
I'll pop down and pat you on the back matey :~}
