What did you do with your Range Rover today

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Well there’s spare fronts on my vehicle if you need them. Never been bothered about collateral damage
View attachment 260330
Problem was bolts holding them in would spin and spin but not budge. Couldn’t fit the angle grinder in there and you know what I’m like for lack of proper tools. If you got a little cutter can get in there would probably be okay just slice the heads off the bolts

Best I have is a junior hackaw.
 
Junior saw probably won’t fit - maybe just the blade with a wooden handle strapped on? Or remove shocks

Rear wiper operates when selecting reverse on mine too

Gates Spill pipe free from Tomcat has arrived. Superior quality to the stuff I’ve been using says 3.2 internal but looks tighter just like Alan likes it :D can’t see me needing to change this again. Hopefully this weekend I will have the chance weather to swap it out, flush intercooler, fit the new hoses and check out my turbo/exh manifold as something going on under that shield
 
Junior saw probably won’t fit - maybe just the blade with a wooden handle strapped on?

Rear wiper operates when selecting reverse on mine too

Gates Spill pipe free from Tomcat has arrived. Superior quality to the stuff I’ve been using says 3.2 internal but looks tighter just like Alan likes it :D can’t see me needing to change this again. Hopefully this weekend I will have the chance weather to swap it out, flush intercooler, fit the new hoses and check out my turbo/exh manifold as something going on under that shield

Bit of insulation tape and you're away. Still, leave them there for when you put it back on air. :)
 
leave them there for when you put it back on air. :)
Gone bit far for that now I’ve chopped too much. Yet, there’s few P38s trundling around on EAS been saved in the process :)
List I have of ‘want to dos’ is too long to entertain EAS I’d have to buy another 38. If you get that win you can buy me one or il have yours ;)
Mmmmm... Ashcroft TB
 
So, I managed to crawl under the scrapper to remove a front sensor, waste of time, too much work required to make a mounting plate etc in the hope that a 27 year old sensor might work. Found a supply of what I think are Chinese knock offs at a less outrageous price than normal. Aliexpress have them for €21 if you can wait for about 8 weeks for delivery.

I've got one of those cheapies on mine, £23 from Amazon IIRC it works surprisingly well I did test it before fitting. ;)
 
Junior saw probably won’t fit - maybe just the blade with a wooden handle strapped on? Or remove shocks

Rear wiper operates when selecting reverse on mine too

Gates Spill pipe free from Tomcat has arrived. Superior quality to the stuff I’ve been using says 3.2 internal but looks tighter just like Alan likes it :D can’t see me needing to change this again. Hopefully this weekend I will have the chance weather to swap it out, flush intercooler, fit the new hoses and check out my turbo/exh manifold as something going on under that shield
Glad you got it Jack, the post has been a nightmare I ordered a seal kit for the FIP supposed to be 5 working days delivery :rolleyes: Not from a big multinational but from a flat down souf o_O eventually arrived 12 days after ordering.at least the lady I emailed had he decency to give me a full refund.;):D
 
Glad you got it Jack, the post has been a nightmare I ordered a seal kit for the FIP supposed to be 5 working days delivery :rolleyes: Not from a big multinational but from a flat down souf o_O eventually arrived 12 days after ordering.at least the lady I emailed had he decency to give me a full refund.;):D

Post has been somewhat erratic here for months.
 
I am doubting myself now, having never had the need to remove a rocker cover on a RV8, could they be handed for inlet/exhaust?
When you buy rockers, you have a choice of LH or RH, no mention of inlet or exhaust.
That said, there were 4of each but I've now lost track of the order they came off in
 
Back
Top