What a surprise a P38 with EAS fault !!

nobber71 · May 4, 2009

I have a P38 with a strange EAS problem, its sat on its bump stops, the compressor runs & cuts out as it should, but no air is entering the bags with no air leaks evident. i've had the driver box replaced (diagnosed by local auto electrician), have also made up the "pig tail" lead & attempted to operate the system manually but to no avail, the solenoids are not clicking as i was told they should when operating system manually using pig tail loom, can anyone please point me in the right direction as it is getting rather frustrating

PLEASE HELP ME thanks guys

gavbriggs · May 4, 2009

maybe the seal(s) on the piston has gone and its not pumping air, just moving with no effect???

BigNigeX4 · May 4, 2009

Hey up Nobber, that sounds all wrong btw mate! Lol

I wonder if you've seen the excellent american site Range Rovers ?
I was looking through and there are some really sensible suggestions for this sort of thing on there. I would suggest you look at the fusebox pages as these are common and are described there.

Range Rover P38/4.0/4.6 Common Problems and Fixes

Good luck and let me know if this helps

Nige

Datatek · May 4, 2009

nobber71 said:
I have a P38 with a strange EAS problem, its sat on its bump stops, the compressor runs & cuts out as it should, but no air is entering the bags with no air leaks evident. i've had the driver box replaced (diagnosed by local auto electrician), have also made up the "pig tail" lead & attempted to operate the system manually but to no avail, the solenoids are not clicking as i was told they should when operating system manually using pig tail loom, can anyone please point me in the right direction as it is getting rather frustrating PLEASE HELP ME thanks guys

If the pump is running but there are no leaks and the suspension is not inflating I'd put money on it being the pump piston seal

thomas tiernan · May 4, 2009

i have a similar problem, yet my pump is working fine, it just seams to be shooting all the air out of the exhaust valve. i put another valve block on this morning, but its still chucking it out of the exhaust valve!!!

nobber71 · May 6, 2009

thanks for your help on this 1 guys will keep plugging away & see what i can find will update you as soon as i know the outcome

What a surprise a P38 with EAS fault !!

nobber71

New Member

gavbriggs

Well-Known Member

BigNigeX4

New Member

Datatek

Well-Known Member

thomas tiernan

New Member

nobber71

New Member

Similar threads