Wastegate Actuator solid

How do I free up a seized wastegate actuator?

done a :search: and found nothing specific about this.....

burn it and wack it with micro propane torch and pin drift....

How have you tried to move it? Did you have a pair of molegrips clamped onto it or did you just push it by hand? As BoB said, but I also drenched the pin with penetrating oil too and then oiled it with 3 in 1 once it was free. The oil is still there now, I thought it'd have burnt away.

-Pos

it has quite a strong spring, are you sure it is siezed?