Realist
Active Member
- Posts
- 311
- Location
- Bargoed South Wales
Anyone got one for sale thats a Pierburgh Maf not your wife, kids or dogs ok 
Regards
Regards
WANTED: Pierburgh Maf
- Thread starter Realist
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
2.0_hippo
Well-Known Member
- Posts
- 6,069
- Location
- Hertfordshire
Realist
Active Member
- Posts
- 311
- Location
- Bargoed South Wales
I know he sells good stuff but was hoping someone had one cheap.
Thanks anyway.
Thanks anyway.
Don't have one, but I put a "09" (can't remember full number) into mine 2 weeks ago, made a hugh difference, smoother, marginally more power (than with it disconnected) and better mpg.
Was a straight swap for the Bosch.
Cost me 116 incl postage form autotechnik in Germany
Was a straight swap for the Bosch.
Cost me 116 incl postage form autotechnik in Germany
murrayslad
New Member
- Posts
- 4
whats the reason you need it for ?
i put a pierburg maf in my freeby, the 090 one, didnt make any difference,still had the same problems as before,intermitent revs,stop start action,disconected it to make it run better,uses more fuel tho.
the pierburg cost me £100 from Air Mass Meters airmassmeters.com
i put a pierburg maf in my freeby, the 090 one, didnt make any difference,still had the same problems as before,intermitent revs,stop start action,disconected it to make it run better,uses more fuel tho.
the pierburg cost me £100 from Air Mass Meters airmassmeters.com
Realist
Active Member
- Posts
- 311
- Location
- Bargoed South Wales
Blowing black smoke so a change was intended to try and cure that but I will when I have time checl all hoses just in case a split is found.
BigRog
Active Member
- Posts
- 115
- Location
- West norfolk
Just fitted a pierburg MAF 7.22684.09.0 to my TD4. Will not rev at all totally flat when flooring the pedal, I ordered it because one of the threads stated that it would be a straight swap for the origonal Maf. Any ideas ?
Optimus Prime
Well-Known Member
- Posts
- 5,988
- Location
- Garden of England
general consensus is match it with a synergy 2
think the pierburg needs compensating to work with td4
Tuning-diesels for cheaper diesel tuning.
(nothing to do with me, never bought from them, no connection, just lots of good things been said)
good luck
think the pierburg needs compensating to work with td4
Tuning-diesels for cheaper diesel tuning.
(nothing to do with me, never bought from them, no connection, just lots of good things been said)
good luck
Here you go....... http://www.landyzone.co.uk/lz/f9/loss-omph-under-3000rpm-140857.html
And your right thats meant to be a direct replacement.........Chaser seys so and he's not often wrong
And your right thats meant to be a direct replacement.........Chaser seys so and he's not often wrong
Last edited:
BigRog
Active Member
- Posts
- 115
- Location
- West norfolk
Refitted the Mafam, and runs ok now, but had wanted to run it as 'standard'
Andrew McIntyre
Active Member
- Posts
- 223
- Location
- Nth Yorks
If your blowing black smoke, it's less likely to be a split hose and more likely to be a collapsing hose and maybe nothing to do with the maf, as black smoke usually means a lack of air.
Ian jones
Well-Known Member
- Posts
- 1,104
- Location
- north east england
Hi i thought black smoke was over fueling and white smoke was to do with air its a split hose or the MAFIf your blowing black smoke, it's less likely to be a split hose and more likely to be a collapsing hose and maybe nothing to do with the maf, as black smoke usually means a lack of air.
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
black smoke is over rich burn caused by excess fuel or restricted air white smoke is either water if disappears straight away or unburned fuel if hangs about back
