austen
Active Member
- Posts
- 455
- Location
- Worcestershire/Shropshire Border
Will pay you for your old VCU's, support bearings and dampers, get intouch if you have any.
WANTED: Old VCU's, support bearings and dampers
- Thread starter austen
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Matt_TD4
New Member
- Posts
- 120
- Location
- Waterford, Ireland
Have a few here, but located in Ireland!
OldIrishWulf
Well-Known Member
- Posts
- 3,974
- Location
- Great green Hibernia .
Hello Matt.
How good is your diff ?
How much do you want for it ?
Mine has a leak,not sure where from.When the weather gets better and the days get a bit longer I might get it off and fix or get it fixed or get a replacement.
How good is your diff ?
How much do you want for it ?
Mine has a leak,not sure where from.When the weather gets better and the days get a bit longer I might get it off and fix or get it fixed or get a replacement.
Matt_TD4
New Member
- Posts
- 120
- Location
- Waterford, Ireland
I'll PM you..
OldIrishWulf
Well-Known Member
- Posts
- 3,974
- Location
- Great green Hibernia .
Are you Austin from bell engineering ?
Do you supply recon diff swap ?
If so I'm interested
austen
Active Member
- Posts
- 455
- Location
- Worcestershire/Shropshire Border
yes and yes
disco_mikey
Active Member
- Posts
- 728
- Location
- Dundee, Scotland
I have an old VCU from a F/Lander. How much do you pay for them? Can send by PM if you want
And dampers? As in shocks/struts?
And dampers? As in shocks/struts?
