Wanted 2.5 td radiator

If anyone has one please contact me............OR.............Does anyone know if the 'plug thread - sleeve can be re fixed in as although my rad is good the threaded filler keeps coming out.

Cheeres,

Al.

Where are you? I have one I took out about an hour ago.

Hi,

Thanks for your reply.

I am in the Midlands, near Wolverhampton M6 J.11 So quite a way I think.....

Let me know what you want for it as it might be worth it.

Cheers,

Al.

How's £35 sound? It was cooling a 19J until today, all in good working order.

A pity about the timing, I was in Malvern 2 weeks ago.

I don't know about shipping costs, haven't shipped anything yet.
Cheers

Yep that is fine thanks.

I just need to make sure it's the right one because it was in my Defender which has a 3.5 RR engine in it.........The rad was in it when I bought it and I have been told it's a 2.5 TD rad with the oil cooler down the side.

Can I get a couple of pics and measure it tomorrow just to make sure with you?

If you have a pic / measurements please send them....thank you.

I will have to see how much collection ius or see if anyone is coming this way....

Alan.

There's no oil cooler on this one! Photo attached.

flatlander said:

How's £35 sound? It was cooling a 19J until today, all in good working order.

A pity about the timing, I was in Malvern 2 weeks ago.

I don't know about shipping costs, haven't shipped anything yet.
Cheers

Click to expand...

Really!?!?!

Ironically i have one but two of the pins are missing. I am comin north in a fortnight.

chunkymunky said:

Really!?!?!

Ironically i have one but two of the pins are missing. I am comin north in a fortnight.

Click to expand...

Cant see oil cooler couplings which should be right hand side

As I said, there is no oil cooler on this one. It was an early 19J, and the oil filter housing seems to be cooled by the main cooling system.

Ah ok.

I live on malvern btw.

It looks the same but without the oil cooler down the right hand side from your photo's angle??

I could probably get it mounted an buy an oil cooler seperately? I will have to measure it tomorrow as it's a tight squeeze...

I have one in good nick with oil cooler. You would have to just cut off two pins from your old one and spot weld on. I am coming your way in two weeks. Away next week.

Here you go. There were no leaks when took off 3 weeks ago. Light Brown bits are just dust from being in shed and i do joinery in there.lol

That looks like the chap.........

I'd give you the measurements but i am waiting to go into cinema to watch batman

Chunky's looks a much better bet, and he's on your doorstep, almost

Chunky, When I've gotten the 200 into my 90 I plan on driving it over to Malvern to meet my mate with a Series 1. Perhaps meet for a pint?

Yeah, good plan. Just done that myself.