Wading Kits?

I have seen dire warnings about water entering axles etc. if wading plugs or a wading kit have not been fitted.

I have several questions if I may......

Where are the breather's terminated as standard if the max wading depth is 20 inches in the manual?

How easy is it to fit a wading kit to a 2005 90?

Should I bother? - I am hoping to attend some pay and play days but nothing too scary.

Does anyone have any other advice on the matter?

Cheers,

three of the breathers pipes on my 90Def were terminated under the bonnet right at the back in the middle of the bulk head. the one from the rear axel was short for some reason which only went along and up the
chassis ..
its not very hard to fit a kit and id say worth it if you going to play in water .wade plugs you can get from b&q £1.08 each you need x2 .

most people extend breather pipes up the side of their snorkels to be well clear of taking in water
b&q also do lengths of this pipe and the joining clips which you may need to extend your breathers . or you could buy a kit form on eblag .

where abouts in Hertfordshire are you ?

I am near Herts too. Give me a shout if you know any good pay and play sites...