Voltage Regulator Series 111
- Thread starter Bonzo
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 83,230
- Location
- Embasinga stocæ
wot type of regulator did yu fit?
jonteewilly
New Member
- Posts
- 93
you need to test the wiring/sender units etc.have you got a multimeter? (can be bought on ebay for just a few pounds and will pay for itself over and over).
- Posts
- 83,230
- Location
- Embasinga stocæ
if its the old bi-metal type - its almost impossible to test.
If its one of the new digital ones - then its easy.
If its one of the new digital ones - then its easy.
jonteewilly
New Member
- Posts
- 93
i think you can test bi metal regulators by placing pos meter lead on output (of reg)and neg lead to earth (meter set to dc volts) you should see a "pulse" reading.
- Posts
- 83,230
- Location
- Embasinga stocæ
it dont work - coz the response times of most multimetres wont show the tru voltage.
jonteewilly
New Member
- Posts
- 93
it works with an analogue meter
brnocz
New Member
- Posts
- 564
bonzo what part of wales you from? you stated you got your meter from swansea4x4 if you need help give me a shout i live in the area and im always willing to assist, regards jim
