Voltage Regulator Series 111

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
B

Bonzo

New Member
Posts
68
Dear All
I have fitted a new regulator (behind speedo) but the Temp & Fuel gauge still do not work.
How can I test the regulator or test for other faults.

Thanks in advance.

Bonzo
 
you need to test the wiring/sender units etc.have you got a multimeter? (can be bought on ebay for just a few pounds and will pay for itself over and over).
 
Yes got a multi meter but have not used in much

Not sure of the type boughy from the 4X4 shop in swansea it has 2 connectors on the back.

Thanks Bonzo
 
i think you can test bi metal regulators by placing pos meter lead on output (of reg)and neg lead to earth (meter set to dc volts) you should see a "pulse" reading.
 
Will have a go at this when I have sorted my Brakes/oil leak out.
I will let you know how I get on.

Thanks Bonzo
 
You must log in or register to reply here.

Similar threads

V
Screw size. Voltage stabilizer
Replies
7
Views
869
Phil Maddox
P
E
Disco 2 Fuel Leak
Replies
1
Views
223
Landmark2
Landmark2
S
voltage stabiliser
Replies
1
Views
401
Tall Ratbag
T
B
Restored 1972 Series 2 Diesel not starting
Replies
16
Views
760
Shedload
S
A
1984 109 FFR 24v oil temp gauge issues
Replies
1
Views
466
layfin
L
Back
Top