doriz
Well-Known Member
- Posts
- 16,782
Those p38 Mondial alloys should make a buck or two, popular with the air cooled scene.
vils 110csw rebuild
- Thread starter vilguy
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
vilguy
Do'er of stuff and the like
- Posts
- 9,915
- Location
- Dumfrieshire
Will whack em on ebay when i manage to get hold of a set of stormer alloys or something to replace them
doriz
Well-Known Member
- Posts
- 16,782
Update?
vilguy
Do'er of stuff and the like
- Posts
- 9,915
- Location
- Dumfrieshire
Picked up new alloys for the rangey today. Will fit em at the weekend.
Csw, last tyre turned up from gemany yesterday. Will fit that tomorrow
Csw, last tyre turned up from gemany yesterday. Will fit that tomorrow
doriz
Well-Known Member
- Posts
- 16,782
Ah well at the least the new alloys should take your mind off the oil slick on the grounds 
/
/
vilguy
Do'er of stuff and the like
- Posts
- 9,915
- Location
- Dumfrieshire
lol, hopefully.
vilguy
Do'er of stuff and the like
- Posts
- 9,915
- Location
- Dumfrieshire
P38 's eas compressor just rebuilt.
Someone's had a go at it recently and ****ed it up. Sheared off bolt in there now sorted and the piston seal was torn.
Now all replaced and it seems much better. No more eas fault
Really easy job to do actually. Took all of 20 minutes!
Someone's had a go at it recently and ****ed it up. Sheared off bolt in there now sorted and the piston seal was torn.
Now all replaced and it seems much better. No more eas fault
Really easy job to do actually. Took all of 20 minutes!
Last edited:
doriz
Well-Known Member
- Posts
- 16,782
Off topic booooooooooooooo
vilguy
Do'er of stuff and the like
- Posts
- 9,915
- Location
- Dumfrieshire
your fault! you started it with your lets have a look at it posts
doriz
Well-Known Member
- Posts
- 16,782
Mate, I wanna see how this camouflage 110 is coming along or have you ditched it for Vilgurl's 90?
vilguy
Do'er of stuff and the like
- Posts
- 9,915
- Location
- Dumfrieshire
ive not done huge amounts, been busy working with her on her 90 but this weekend its getting its last tyre, the led headlights, sort out the front wheel arches (i need to fit the remaining wide arches due to the 12.5" wide tyres)
Gonna start work on getting the salisbury rear axle with discs in with new QT trailing arms and A arm too. Need to order some calipers for it from somewhere
but this weekend its getting its last tyre, the led headlights, sort out the front wheel arches (i need to fit the remaining wide arches due to the 12.5" wide tyres)Gonna start work on getting the salisbury rear axle with discs in with new QT trailing arms and A arm too. Need to order some calipers for it from somewhere
vilguy
Do'er of stuff and the like
- Posts
- 9,915
- Location
- Dumfrieshire
whats the difference between the 4 pot and 2 pot calipers on the rear of salisbury axles? Ive seen some people advertise axles with 4 pot cali's but i cant seem to find any to buy?
Are they misunderstanding what 4 pots are or can you actually get em?
Are they misunderstanding what 4 pots are or can you actually get em?
doriz
Well-Known Member
- Posts
- 16,782
vilguy
Do'er of stuff and the like
- Posts
- 9,915
- Location
- Dumfrieshire
well i cant find em!
i can only find 2 pot or 1 pot calipers
i can only find 2 pot or 1 pot calipers
vilguy
Do'er of stuff and the like
- Posts
- 9,915
- Location
- Dumfrieshire
forgive the boring as hell voice and crap editing
vilgurl
Member
- Posts
- 18
vilgurl
Member
- Posts
- 18
doriz
Well-Known Member
- Posts
- 16,782
its such a good job Mr Vil has an intelligent woman to help him post videos!!
Miracle Mr Vils got hair
vilguy
Do'er of stuff and the like
- Posts
- 9,915
- Location
- Dumfrieshire
I am truly crap with IT equipment
vilguy
Do'er of stuff and the like
- Posts
- 9,915
- Location
- Dumfrieshire
Replacement 2nd row door fitted on one side. Other to do
