vibration problem

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

chrisgair

New Member
Posts
15
Location
Middlesbrough UK
hey guys i am looking for some advice from you all, i have a disco 300 tdi and when driving at over 40 mph if i go over a manhole cover or the drain covers at the edge of the road the whole car shakes violently and wont stop til i slow right down any ideas what this could be would help massivley :confused:

cheers
chris
 
hey guys i am looking for some advice from you all, i have a disco 300 tdi and when driving at over 40 mph if i go over a manhole cover or the drain covers at the edge of the road the whole car shakes violently and wont stop til i slow right down any ideas what this could be would help massivley :confused:

cheers
chris

Try having a look at all the ball joints, track rod ends, bushes and check the wheel bearings (maybe could do with a tweak). Mine did the same, it was the wheel bearings.
 
has just passed mot 2 weeks ago and has been doin it for a while now so i presume ball joints and stuff are fine will put new bearings in an see if that solves it cheers
 
There is lots of metal in the land rover steering system, so once it starts wobbling it just keeps on shaking.

Release the steering damper and remove both front drag link and rear track rod.

Jack the axle and feel for play in the wheel bearings or swivel hub bearings.

Feel for lots of play in the steering box.

Also squish the steering damper in and out, it should be very firm from the first movement. Any initial play, farting noises or ease of movement and it's pooped.

Hth, sam.
 
Happened to me, only it was at about 64mph to the dot, turns out it was the pre load on the swivel hub.

Worked a treat after that.
 
hey guys i am looking for some advice from you all, i have a disco 300 tdi and when driving at over 40 mph if i go over a manhole cover or the drain covers at the edge of the road the whole car shakes violently and wont stop til i slow right down any ideas what this could be would help massivley :confused:

cheers
chris

Swivel hub bearings knackered or need adjusting.
 
Back
Top