rippedoff
Banned
- Posts
- 114
- Location
- Lowestoft, Suffolk
VCU Bearing size is 6006. Easy to change. Just press old ones out and new ones in. Cost £12 for 2 from SKF. Better than LR .
VCU Bearing size
- Thread starter rippedoff
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
ming
SPACE TWOT
- Posts
- 11,977
- Location
- PLANIT ZOG
Usefull info . . . .any particular type ?
rippedoff
Banned
- Posts
- 114
- Location
- Lowestoft, Suffolk
Well if your going to replace them then buy the best you can get. SKF which are quality bearings are around £6 each. One per carrier, 2 in total.
Is this the one,
SKF 60062RS1 Sealed Deep Groove Ball Bearing 30x55x13mm Simply Bearings Ltd ~ Oil Seals SKF FAG TIMKEN KOYO NTN NKE TRULOC Needle Rollers Taper Rollers Rod Ends Oilite Bushes Loose Balls O Rings Grease Plain Thrust
You need to check the condition of the rubber it mounts into first though.
SKF 60062RS1 Sealed Deep Groove Ball Bearing 30x55x13mm Simply Bearings Ltd ~ Oil Seals SKF FAG TIMKEN KOYO NTN NKE TRULOC Needle Rollers Taper Rollers Rod Ends Oilite Bushes Loose Balls O Rings Grease Plain Thrust
You need to check the condition of the rubber it mounts into first though.
freelance
Well-Known Member
- Posts
- 8,488
- Location
- essex and beyond
make sure you buy 6006 2RS as these are greased packed with rubber shields,
gavin86
New Member
- Posts
- 12
- Location
- county durham
anyone know how to pop old ones out??
- Posts
- 83,232
- Location
- Embasinga stocæ
full write-up is in the FAQ section
gavin86
New Member
- Posts
- 12
- Location
- county durham
cheers sorry new to this
gavin86
New Member
- Posts
- 12
- Location
- county durham
any link to it can't seem to find it
cheers
cheers
- Posts
- 83,232
- Location
- Embasinga stocæ
