Vault loss through engine

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Thanks for all the abuse about my vault finding guide ha

any way am back from work and going to carry out the volt trouble shooting guide .

during the removal of the air intake to turbo noticed a little bit oil in there not much tho . And notice these vanes on my turbo cartridge don’t look normal could you tell me if these look standard or not
Will report back on what (vault) loss of any I find .
 

Attachments

  • EEC5DABB-7C16-4B16-B5BC-93291827C0BA.png
    EEC5DABB-7C16-4B16-B5BC-93291827C0BA.png
    770 KB · Views: 121
  • 7E87C94B-AA0C-4387-889D-E6183F116DC8.png
    7E87C94B-AA0C-4387-889D-E6183F116DC8.png
    723.7 KB · Views: 106
Thanks for all the abuse about my vault finding guide ha

any way am back from work and going to carry out the volt trouble shooting guide .

during the removal of the air intake to turbo noticed a little bit oil in there not much tho . And notice these vanes on my turbo cartridge don’t look normal could you tell me if these look standard or not
Will report back on what (vault) loss of any I find .
 
Normal to see a bit of oil as there should be a breather from the cam cover leading to the air intake to the turbo.
Yeh checked out let of turbo to , no oil running in the just needs to be cleaned . A just don’t think the cartridge look like a normal one ?
 
Thanks for all the abuse about my vault finding guide ha

any way am back from work and going to carry out the volt trouble shooting guide .

during the removal of the air intake to turbo noticed a little bit oil in there not much tho . And notice these vanes on my turbo cartridge don’t look normal could you tell me if these look standard or not
Will report back on what (vault) loss of any I find .

just found this look like it has upgraded turbo
 

Attachments

  • B6E07053-E1D0-4A9C-9198-9F16F408C0DD.png
    B6E07053-E1D0-4A9C-9198-9F16F408C0DD.png
    631 KB · Views: 102
The fins shouldn't touch the sides, if you here any scraping on the sides (turning by hand) it fubar, if there's any play (try and wiggle them) again its fubar
 
The fins shouldn't touch the sides, if you here any scraping on the sides (turning by hand) it fubar, if there's any play (try and wiggle them) again its fubar


Tried it earlier up and down slight but no back and fourth , al check for scraping in morning
 
Back
Top