Urgent Help Please

Hi all,

I've just changed the master cylinder in my 1998 300tdi defender 90. When i put the pedal box back in, the pedal looks way too far towards the bulkhead, this is prooved as the assistance spring wont go back on where the pedal is and the peadl wont come back any further. Any ideas? Secondly after bleeding system and with a constant flow of air free fluid, there is about half free play and half resistance?? I am Stumped any advice would be great.

Thanks Oli

the rod that goes from pedal to cylinder is adjustable you need 13mm or 1/2 inch ring spanner with end cut enough to go over rod ,if you go too far it can stop oil returning to res allowing clutch to remain pressed and slippage

Keep an eye on this thread Urgent Help Please!! - Land Rover Zone this fella has the same problem as you