under the disco

int it meant to give a more uiniform coating too?


arternoon aberdeen angus.

how do you apply waxoyl. doesnt in come in a little like varnish tin? van you just use it on a brush or is there another way?
cheers

You can spray it on, if you can get access to a compressor and shutz gun you could use that, this lets you spray it into the chassis box section.

Screwfix do a version in a can which is quite good, I use it for small jobs where its not practical to get the shutz gun going (cleaning is time consuming). I find its pretty good. Under Seal Black 500ml - Screwfix.com, Where the Trade Buys

You can buy the Hammerite Waxoyle in a can and paint it on if you want but to be honest its just not going to get into all the little tight gaps unless you spend a LONG time on it, also its near impossible to get it into the chassis this way.

If you have a little search about there are many posts on it, including how to work with spray on waxoyle to get the best results.

mix it with thinners and spray it on

Waxoyl used to sell a tin of about 3 litres which came with a plunger to pump air in as a mini compressor, it had attached a 'wand' with an adjustable head which is a bit like a weed killer sprayer (now there's an idea). I still added thinners though cos it's a bit thick when cold.

I have not seen it about for a couple of years but try paint refinishers or Halfords ect.

regards

Dave

Not this again.Waxoyl hammerite on top .Hammererite ,Waxoyl on top .No wait.! Old engine oil ,Spray it everywere .What ever you do it'll still fookin rust.!