Freelander 1 Turbo bolts TD4 O4

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Andy Warren

Well-Known Member
Full Member
Posts
2,061
Location
Hertfordshire
Hi all, I replaced the thermostat housing on my 04 TD4 facelift yesterday but whilst I had all the bits off I noticed oil in the turbo, compressor side, I checked the rest of the intercooler/pipe work & found more oil (when I first got the F/L 04/17 & before I started driving it I serviced it, oils filters etc including c/case filter cleaned all the inlet manifold & replaced all the intercooler hoses with silicone). I have changed the oil every 5,000 miles since along with genuine filters, the last change about 600 miles ago. Anyway whilst I'm here I have started to removed turbo as theres up & down play in the shaft, everything is off but I'm not sure what socket fits the three bolts that hold the turbo to the manifold, a 12mm bi hex socket seems a good fit but the bolts seem bloody tight & I don't want to round them off so does anyone know the correct type off socket fits them ? Help as always much appreciated.
 
Back
Top