Disco 2 Transfer box leak

Hi all

I think my transfer box is leaking oil !!! (has the handbrake thing connected to it)

is this common??? is it just acase of taking it off and changing the gaskets?

how hard is it to drop the box???

and is this all i would need?
http://www.ebay.co.uk/itm/Land-Rove...set-RTC3890-/221098389279?hash=item337a7daf1f

cheers
griff

gasket kit wont help a d2 t/box , where is it leaking rear seal or has the 3 studs holding the damper weight come loose and oil leaking between speedo housing and main box, if housing remove clean well and refit with a bead of rtv silicone sealant between

i think its from around here

jamesmartin said:

gasket kit wont help a d2 t/box , where is it leaking rear seal or has the 3 studs holding the damper weight come loose and oil leaking between speedo housing and main box, if housing remove clean well and refit with a bead of rtv silicone sealant between

Click to expand...

i'm asking cos i really dont know, what do you call ''speedo housing'' on the D2 transfer box please? could you tell it's ''official'' name as it appears in RAVE?... mine has a slight leak too but i can't figure out from where

sierrafery said:

i'm asking cos i really dont know, what do you call ''speedo housing'' on the D2 transfer box please? could you tell it's ''official'' name as it appears in RAVE?... mine has a slight leak too but i can't figure out from where

Click to expand...

rear output housing,as far as im aware the manuals allways referred to it as housing speedo assembly, the damper weight can loosen the 3 studs that secure it

griff2 said:

i think its from around here

Click to expand...

the thing hand brakes attached to,confused me ,if its leaking from bolt remove bolt apply some sealant to threads and refit ,if its running down from front its likely to be leaking from front of intermediate shaft , you can se the shaft set slightly in from front surface about 1/2 way up

jamesmartin said:

rear output housing,as far as im aware the manuals allways referred to it as housing speedo assembly, the damper weight can loosen the 3 studs that secure it

Click to expand...

thanks, got it now