Traction failure on start up plus Abs fault

Hello guys
After goin over a speed bump last week the abs and traction light come on.
When I take keys out ignition the traction warning message illuminates .
And when I start car same message comes up then when I drive the abs fault comes up
Any ideas
Gunna disconnect all wheel sensors but think it might be more severe..
Cheers:screaming_bug_eye_f

Check all are seated correctly into the hub , might have a worn wheelbearing .

if sensors seated ok then check brake light switch as this is the favorite for giving ABS traction failure message.
the way to adjust the switch is to pull the plunger that is on a rachet out as far as it will go and then let brake pedal back and it will adjust itself

theharomaster said:

Hello guys
After goin over a speed bump last week the abs and traction light come on.
When I take keys out ignition the traction warning message illuminates .
And when I start car same message comes up then when I drive the abs fault comes up
Any ideas
Gunna disconnect all wheel sensors but think it might be more severe..
Cheers:screaming_bug_eye_f

Click to expand...

That will achieve nothing unless you mean you are going to check the cables and connectors.