tps

can anyone tell me the throttle position sensor type please?

i need to know whether its 0-5v or 5-0v

0-5v according to rave page 356

guess you got rave working then!!! does it say anything about lambda voltage?

gavbriggs said:

guess you got rave working then!!! does it say anything about lambda voltage?

Click to expand...

the voltage of the h02s sensors at the stoichiometric point is 450 to 500mv, the voltage decreses
to between 100 and 500 mv if there is an increase in oxygen temperature ie a lean mixture,
the voltage increases to between 500 and 1000mv if there is a decrease in oxygen contaent, signifying
a rich mixture
does that help? i have no idea what it means but it looked good

nathan5346 said:

the voltage of the h02s sensors at the stoichiometric point is 450 to 500mv, the voltage decreses
to between 100 and 500 mv if there is an increase in oxygen temperature ie a lean mixture,
the voltage increases to between 500 and 1000mv if there is a decrease in oxygen contaent, signifying
a rich mixture
does that help? i have no idea what it means but it looked good

Click to expand...

Not quite - Gav's truck is a Gems one,so its oxy sensors are Titania 5-0v ones.So an output of 5v is lean,0v is rich.

its for the lpg setup, i wanna get it spot on, just got to get all the settings correct. as i'm not too experienced with lpg i wanted to have someone send me thier setup file so i can compare em but i cant find any p38's with a aeb leonardo controller!