timing belt help please 300tdi

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
barmatt said:
Does sound rather fishy,

I would come and help Sam as I'm not a million miles away but I wouldn't know what to do if the rods are bent:confused:
change 'em I suppose.
Click to expand...


any help would be great please i am at a total loss on what to do apart from put it on ebay as scrap x
 
before you do anything get on fleabay and invest a tenner in a haynes workshop manual then read the bit on changing the belt.
then use google and youtube youll then know whats what, even if you dont actually tackle it alone youll get some idea of whats yer help is doing and how competent they are.
 
biolandy said:
If you have the time Barmatt,I would just re-align it to the timing marks and pins first,to see how it sounds-might get away with it.If you are lucky might be pump too far advanced causing diesel knock-If you do go,show her what you are doing so she learns for herself for next time
Click to expand...

Can't get there today, working. Earliest I could go is Wednesday.

There must be someone nearer Cambridge than me (70 miles from here) that can go help a lady in distress.

Yes that's right LZ'ers, a LADY in distress!


awaiting stampede..............................
 
If your dad fitted another pump,cannot he re-time the engine for you?It really is an easy engine to time up and 5 days to start tells you something is way out-do not attempt further running until it is set up correctly-if it is just mis timed,could have it running properly in an hour assuming nothing is damaged
 
biolandy said:
If your dad fitted another pump,cannot he re-time the engine for you?It really is an easy engine to time up and 5 days to start tells you something is way out-do not attempt further running until it is set up correctly-if it is just mis timed,could have it running properly in an hour assuming nothing is damaged
Click to expand...

dad never fitted pump the bloke who done timing belt done it :eek: dad just provided the pump :confused:
 
barmatt said:
Can't get there today, working. Earliest I could go is Wednesday.

There must be someone nearer Cambridge than me (70 miles from here) that can go help a lady in distress.

Yes that's right LZ'ers, a LADY in distress!


awaiting stampede..............................
Click to expand...

70 miles thats far thank you soooo much i have just called a mobile mechanic who will listen to it on monday and give me a quote im dreding what he says
 
sam260173 said:
70 miles thats far thank you soooo much i have just called a mobile mechanic who will listen to it on monday and give me a quote im dreding what he says
Click to expand...

Don't mind the drive as I can pop in and see my lil' sis in Ely, let us know what the mechanic says and take it from there. I wouldn't worry too much there's not much that can't be fixed.

I'm no expert by any means but there's a wealth of knowledge and assistance on landyzone that has helped me many times, so always willing to return the karma. :)
 
I would be very surprised if there was anything wrong with the original pump-those bosch pumps normally out live the engine-they are almost bullet proof.
But ,do you know if when he changed the pump,did he also swap over the drive sprocket(bit the cam belt sits on),for if he did it may not have been fitted in right place,there is no key way on these and changing the sprocket is critical to get it absolutely correct.
 
barmatt said:
Don't mind the drive as I can pop in and see my lil' sis in Ely, let us know what the mechanic says and take it from there. I wouldn't worry too much there's not much that can't be fixed.

I'm no expert by any means but there's a wealth of knowledge and assistance on landyzone that has helped me many times, so always willing to return the karma. :)
Click to expand...

Post what you find Barmatt loads on here ready to help
 
biolandy said:
I would be very surprised if there was anything wrong with the original pump-those bosch pumps normally out live the engine-they are almost bullet proof.
But ,do you know if when he changed the pump,did he also swap over the drive sprocket(bit the cam belt sits on),for if he did it may not have been fitted in right place,there is no key way on these and changing the sprocket is critical to get it absolutely correct.
Click to expand...


he said part of the casing was broke..... i had a tappin noise at 20mph it dissapeared at 30+ mph so he replaced it thats when this loud noise started and he said my engine is knackared :confused:
 
sam260173 said:
he said part of the casing was broke..... i had a tappin noise at 20mph it dissapeared at 30+ mph so he replaced it thats when this loud noise started and he said my engine is knackared :confused:
Click to expand...
so he bust pump casing ,probably by trying to turn it over with pin still in ,
 
just spoke to dad and the pump the bloke fitted did NOT have the bit that the pulley bolts onto on the pump dad thinks that the timing on the pump is out badly does this mean i need a new pump :confused:
 
there are some very good mechanics out there and some very good diyers that could match them on specific models ,but there are a lot of poor mechanics with poor knowledge too ,for the next time you need to find someone who knows what there doing and trust worthy ,ask a good few questions about a particular job and check there answers on here ,it will help sort the wheat from the chaff
 
jamesmartin said:
there are some very good mechanics out there and some very good diyers that could match them on specific models ,but there are a lot of poor mechanics with poor knowledge too ,for the next time you need to find someone who knows what there doing and trust worthy ,ask a good few questions about a particular job and check there answers on here ,it will help sort the wheat from the chaff
Click to expand...

wish i had your advice b4 i let him do it :mad:
 
sam260173 said:
just spoke to dad and the pump the bloke fitted did NOT have the bit that the pulley bolts onto on the pump dad thinks that the timing on the pump is out badly does this mean i need a new pump :confused:
Click to expand...


does the above seem possible only relaying what dad said and if i do need one does anyone have a good spare pump for sale;)
 
sam260173 said:
just spoke to dad and the pump the bloke fitted did NOT have the bit that the pulley bolts onto on the pump dad thinks that the timing on the pump is out badly does this mean i need a new pump :confused:[/quote
it will be out in that case then you will need someone who has knowledge on pumps to reset it or competent person who can take instruction
Click to expand...
 
You must log in or register to reply here.

Similar threads

F
Oil leak out of timing cover after timing belt change 300tdi
Replies
17
Views
2K
fraserp
F
S
Discovery Sport (Dec 2015) Timing Belt
Replies
2
Views
3K
james7676
J
W
Zeus Timing Gears for 300TDI - wanted
Replies
2
Views
749
julianf
julianf
B
Discovery Sport LR DS and Ghost 2
Replies
4
Views
885
Bp112
B
M
19J timing case on 12L discovery engine
Replies
4
Views
373
lynall
L
Back
Top