Good Morning all,
When cold there is no fast idle unless you hold the pedal. After a while it runs fine, I have had the inlet off a number of times and replaced the upper and lower inlet manifold gaskets and done a compression check. I have read the ECU needs to be reset after these types of operations? I'm off to check the two temperature sensors, but any help/advice would be gratefully received.
Many Thanks.
When cold there is no fast idle unless you hold the pedal. After a while it runs fine, I have had the inlet off a number of times and replaced the upper and lower inlet manifold gaskets and done a compression check. I have read the ECU needs to be reset after these types of operations? I'm off to check the two temperature sensors, but any help/advice would be gratefully received.
Many Thanks.
Last edited: