ward
New Member
- Posts
- 7
- Location
- laois rep. ireland
hi, new to this so bear with me, have a discovery 2 td5 '00 reg, abs, tc and hill descent lights on all the time, changed hub and sensor still no diff', any ideas?
three amigos
- Thread starter ward
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
sensor can be quite difficult to get in right try removing oring then reft if it puts light out you know its not seating properly ive even had to fit the old oring before,how did you know which to change
ward
New Member
- Posts
- 7
- Location
- laois rep. ireland
passenger front bearing was gone so was told that was probably guilty one but not so sure now, bearing is quiet now but lights are the same
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
still try sensor ive had a few like that
ward
New Member
- Posts
- 7
- Location
- laois rep. ireland
Had a bmw 1100 bike before, used to have similiar prob with abs lights, could reset it with a wire from battery to sensor, hardly that simple with discovery (clutching at straws now)!
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
well i giving you one
ward
New Member
- Posts
- 7
- Location
- laois rep. ireland
Cheers, i'll try that tomorrow, a little afraid of it!!
