Thick Rust removal

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
A

asnelling

Member
Posts
24
Hey all
So i saw a video on youtube of this guy who has a turbo which was covered in thick rust, a lot like mine. he soaks it in a solution for 2 hours and when he removes it its as good as new.
Does anyone have any experience with such a solution? if so which one would you reccomend? i'm more into the "leave to soak" ones than the "rub in" ones :D
 
You could use electrolysis. There are plenty of videos on YouTube.
The results can be amazing but it's just a bit of a pain setting everything up.
 
THE best rust/scale remover for steel is phosphoric acid. It can be purchased on ebay at strengths up to around 82%, but it needs to be diluted to around 30% to work effectively. Dissolves rust and passivates the steel surface with iron phosphate. I've tried many other rust treatments over the years, but none are a patch on phosphoric acid.

What metal are turbos?
 
v8landyman said:
the best rust/scale remover for steel is phosphoric acid. It can be purchased on ebay at strengths up to around 82%, but it needs to be diluted to around 30% to work effectively. Dissolves rust and passivates the steel surface with iron phosphate. I've tried many other rust treatments over the years, but none are a patch on phosphoric acid.

What metal are turbos?
Click to expand...
+1
 
You must log in or register to reply here.

Similar threads

MollyNomad
IRD REMOVAL AND TURBO WORRIES
Replies
13
Views
880
MollyNomad
MollyNomad
S
THAT circlip on the primary shaft
Replies
8
Views
749
Wildefalcon
W
Flossie
P38A Steering wheel decals
2
Replies
28
Views
1K
Flossie
Flossie
bahteles
Disco 2 Td5 No power after 2.5k - 3k RPM
2
Replies
27
Views
2K
bahteles
bahteles
bahteles
Disco 2 Discovery td5 auto cutting out after 2.500 rpm [Solved]
Replies
15
Views
3K
Steven Sheppard
S
Back
Top