P38A Thermostat

Baileyroverq · Mar 13, 2016

Hi all does anybody know what size or where I can get the 3 bolts for the thermostat housing on a 2.5 dse as stupidly whilst changing thermostat I sheared on off in the engine side have got it out with patience and mole grips but now need new bolts to finish job off typically everything else was going great upto this point any help is appreciated thanks

allanw · Mar 13, 2016

Look around the front bonnet slam panel area. There may be one you can remove and " borrow" for an emergency. Then replace a s a p.

Baileyroverq · Mar 13, 2016

Oh great thanks for that will have a look

wammers · Mar 13, 2016

Baileyroverq said:
Oh great thanks for that will have a look

STC2347 or LR007746. Or any good quality all threaded bolt M6x25. If you use plain bolts fit a washer.

Baileyroverq · Mar 14, 2016

Thanks for that wammers I'll get some ordered

P38A Thermostat

Baileyroverq

Active Member

allanw

Active Member

Baileyroverq

Active Member

wammers

No longer with us, RIP

Baileyroverq

Active Member

Similar threads