The big problem My Discovery TDI 300 body replacement

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.


Everything has to be dismantled to move parts from the old to the new Land Rover.

I found a strange device digging in electrics.

It looks like an electric thermostat and it is connected with a box for heating. What is it?





There are two relays and a probe that is inserted into the box with the radiator. :confused::confused::confused:

Impressed with your work - good to see you doing this and saving a Disco!
 

Rain again :mad:



Progress is here...



Heating unit finaly...



Now yust to connect everything and we are ready to drive again :rolleyes:
 


Not an easy job but...



Fitting alternated dash board...



Ouch Miles vs KM...



Steering in mint condition lovely.
 


And Steering on the right left side :D



After 15 days, finnaly battery connected and everything works perfectly :cool::tea:
 
Last edited:
Yes, Webato and Parrot installed. I did not move ABS unit. In the place of this unit on the right side I installed Parrot and Webasto electronic..
 


Now mechanical stuff...



Everything must be removed from old one and transfered to new...



Heavy ... easy to break some bones.... :violent:
 
How are you getting on with this? Excellent work, if you put your mind to something and get on with it it's amazing what you can achieve.
 
I'm not finished yet, I have to replace chassis. So first old one needs to be washed:



Old body has been removed and scrapped.



Engine and gearbox out, everything prepared to put body on this chassis.

 
Back
Top