Disco 1 Terrafirma +2" lift

Finally finished the old Disco, really wanted to let people know about how good the Terrafirma kit is!

Fitted:
30mm wheel spacers
+2" Medium load, All terrain suspension kit (had to replace rear drop links)
Window wind shields

On the road, almost exact smooth comfortable ride, a lot less body roll "maybe due to anti-roll drop links" but absolutely over the moon with the look and feel. Highly recommended.

very nice shiney disco , glad your happy with the kit , i was impressed too

Looks good dude. I did similar with OMU springs and shocks light load. Makes the disco more imposing. Had to get new wheels as well cause the 18" ones with 255/55/R18 looked really small and odd after the lift.

Did you put new springs on the back? I'm looking at lifting mine but I want to keep the air suspension, and just change the dampers.

LandyMan said:

Did you put new springs on the back? I'm looking at lifting mine but I want to keep the air suspension, and just change the dampers.

Click to expand...

Yes mate, replaced all shocks & springs, as needed it was sitting low at the back and was really soft..... The old stuff was done for

Mechanically I can't fault the Terrafirma lift kit I put on mine, but within 12 months and less than 6000 miles the paint was falling off the springs. By 18 months the paint had all gone and the springs were covered in rust. It hasn't affected their operation but I would have thought a supposed quality brand would have had a better standard of finish.