temp sender disco 200tdi

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
mick the builder

mick the builder

Well-Known Member
Posts
5,901
Location
Sligo,Wild West of Ireland.
I need to change temp sender as readings are way out with my defender gauge . My one has a brown end. I came across this thread a while ago about the different coloured ends but i cant find it now. Does anyone know what the colours apply to.
 
Hi I had the same problem was the 200tdi the original engine as I had a NA and put a 300tdi out of a disco and the sender is not compatible with the gauge. there was a company that sold the adapter to use the original NA sender but it didnt fit so i ended up buying a 300tdi defender sender and a 300tdi gauge now its as good as gold and sits in the middle all of the time. hope this helps. I know the red and Blue are one is for a Defender and the other for a Disco.
 
denis the menace said:
Hi I had the same problem was the 200tdi the original engine as I had a NA and put a 300tdi out of a disco and the sender is not compatible with the gauge. there was a company that sold the adapter to use the original NA sender but it didnt fit so i ended up buying a 300tdi defender sender and a 300tdi gauge now its as good as gold and sits in the middle all of the time. hope this helps. I know the red and Blue are one is for a Defender and the other for a Disco.
Click to expand...
Cheers Denis, i have a disco 200tdi fitted into a defender. I know i can get the right sender for the defender gauge, i just wondered what the different coloured ends ment. The gauge is obviously wrong and i have a brown ended sender. I have got a second hand green ended sender today of a local mechanic to try but i just wanted to know if either of these were the right ones to work the gauge, if not what coloured end would be the right one?
 
Mick, steve parker sells two types of senders for 200tdi disco engines in defenders. The disco engines used two types of thread. So you have to determine if your current sender has coarse or fine thread. If it has coarse thread it seems that you can also use a 2.5 n/a sender (PRC6663).

You find the senders here: Steve Parker Land Rover Spares, Details of Category Name 200 Tdi Discovery > 90/110, Spare Parts, Freelander, Defender, Range Rover Parts, Land Rover Conversions

Also check the partnumber of your gauge. You need gauge prc7311 to get the senders mentioned above to work properly.

good luck!

Joachim
 
I went to the main dealer and gave them my chassis No etc and they said ""it could be one of three, Which one do you have in now"" :scratching_chin::doh::frusty:
 
You must log in or register to reply here.

Similar threads

G
Coolant temperature sender Series 3 2.25 diesel question.
Replies
5
Views
580
Guidoma
G
P
200TDi Oil Pressure Switch Thread?
Replies
2
Views
850
steve2286w
steve2286w
O
Aftermarket capillary temp gauge
Replies
4
Views
1K
lynall
L
T
200tdi temp gauge woes
Replies
16
Views
2K
Seaswood
Seaswood
ER1C
200TDI laid up for a long time
Replies
5
Views
610
dag019
dag019
Back
Top