TD5 - Two pushes before Servo bites

cobra_mark · Jun 13, 2010

Brakes are firm and bled okay initial braking is good but if you lift off and press lightly the bite is very good.

Could this be a servo pipe/filter leak issue?

I have followed the pipes around all seem in good condition ( 116k 2000 TD5)

Pads and discs are okay but will need replacement, but I do not feel contribute as it centres on servo efficiency.

Thanks for any suggestions in advance.

thebiglad · Jun 13, 2010

cobra_mark said:
Brakes are firm and bled okay initial braking is good but if you lift off and press lightly the bite is very good.

Could this be a servo pipe/filter leak issue?

I have followed the pipes around all seem in good condition ( 116k 2000 TD5)

Pads and discs are okay but will need replacement, but I do not feel contribute as it centres on servo efficiency.

Thanks for any suggestions in advance.

This is a known issue with Disco TD5 - not a fault as such.

Kernow nige · Jun 13, 2010

thebiglad said:
This is a known issue with Disco TD5 - not a fault as such.

thas good news........not only me then

martinhollings · Jun 13, 2010

as said mine is the same

cobra_mark · Jun 14, 2010

Well I feel semi reassured

. Thanks guys thought it was just me. A bit scary sometimes though if your stopping distances are not good.

jsbholden · Jun 14, 2010

and me!!!

TD5 - Two pushes before Servo bites

cobra_mark

New Member

thebiglad

Well-Known Member

Kernow nige

New Member

martinhollings

New Member

cobra_mark

New Member

jsbholden

New Member

Similar threads