TD5 Hand Brake problem!

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Jason2

Jason2

Well-Known Member
Posts
2,001
Location
Poitou Charentes-France
Jumped in the TD5 auto this morning, started her up,let the handbrake off and all the electrics went off-Dead!:mad: Wiggled it about a bit back on!

The hand brakes sticking on which in't a problem as I'l whip the drum off this afternoon but why is the hand brake switch cutting all the electrics off-All even the clock goes dead???

Cheers

Jason
 
Disco 1's had a problem for a while of the handbrake cable acting as an earth point and occasionally getting very hot! ... could be something like this. Certainly I'd check all earth points/straps etc, especially the battery connections.
 
Paul D said:
Disco 1's had a problem for a while of the handbrake cable acting as an earth point and occasionally getting very hot! ... could be something like this. Certainly I'd check all earth points/straps etc, especially the battery connections.
Click to expand...

Cheers Mate:)

Bought the old girl a couple of months ago from a garage who had just changed the battery and the dim sh*t's had'nt put the body earth strap back on to inner wing so she's been earthing through the hand brake cable ever since:eek:

Now sorted:)
 
Nice one. ;)

Well done for posting back that it worked too, might help someone else!!
 
Hi all, I have the exact same problem with my 1999 TD5 Manual. Starts fine but let the handbrake off and everything cuts out. I'll check the earth connections and see if that sorts it.
 
Hi all, I had the exact same problem with my 1999 discovery td5 Manual. Would strart and run fine but the radio would cut out and come back on also the hand brake was getting hot.

The Problem turned out to be a bad earth to the body.

Fixed the bad earth and also added an earth cable from the engine to the earth strap on inner wing.

All good now.
 
Paul D said:
Nice one. ;)

Well done for posting back that it worked too, might help someone else!!
Click to expand...

well blow me down , my hand brake getting to hot to touch , and now wont start just click from solenoid so guess i have earth problem to , glad i came on and found the same problem , will check all earth straps tommorw , thanks guys !!!!!!
will post outcome , had lots of silly little problems lately , but getting them sorted .
 
drummerboy911 said:
well blow me down , my hand brake getting to hot to touch , and now wont start just click from solenoid so guess i have earth problem to , glad i came on and found the same problem , will check all earth straps tommorw , thanks guys !!!!!!
will post outcome , had lots of silly little problems lately , but getting them sorted .
Click to expand...

with discos etc body ,chassis ,engine/transmission ,need earth to battery well ,cables can often look good but not conduct current ,jump leads can be used to prove the point by acting as extra earths ,clicking starter motor is usually contact kit that is needed about £10 on ebay
 
dsuze96 said:
It was supposedly sealed for life.
22.jpg
Click to expand...

what was
 
Hoping I might be able to get some advice - I had the same problem with a corroded cable and earthing through the handbrake. Now I have changed the cable she started brilliantly - but the handbrake won’t release 🤦‍♂️ - any thoughts? Might it have “welded” itself stuck - where would everyone start? Thanks in advance
 
You must log in or register to reply here.

Similar threads

sonicm1etn
intermittent completely dead fault TD5 D2
Replies
7
Views
538
Shedload
S
J
Disco 2 Brake light problem - third light only & taillights go off when braking
Replies
1
Views
488
sierrafery
sierrafery
D
Td5 defender vibration
Replies
11
Views
545
bankz5152
bankz5152
T
L322 Vogue reversing problem. Feels like brakes are on !
Replies
8
Views
945
nevillen
nevillen
S
TD5 Hand brake
Replies
7
Views
868
Anaconda
A
Back
Top