Hi everyone, hope you are all well. I’m new to posting on here so let’s see how this goes! Recently purchased a disco 2 still on air, well today it decided to play up and drop right down, after lots of reading on the forum I thought I would check the ride height sensors, so disconnected the battery and found that 2 of the pins in one of the sensors had snapped off in the plug,managed to change the plug over and put a new sensor on, reconnected the battery, started up and air bags inflated, but it is now higher on the side with the new sensor, 30mm higher. Does this mean it will need plugging in and calibrating? Any help would be great, thanks
Andy
Andy
