Suspension lift?

Hi all

Currently running a gwyn Lewis challenge kit with is 2" lift, looking to get some bigger tyres on the truck may be 33" or even 35" is anyone running these size tyres? If you are how high are you lift wise? Was thinking of going a 2" body lift and +11 shocks but not sure if this would allow me to get 33" tyres in with no rubbing at articulation?

At the moment I'm running a 2" suspension lift with 285's,which are 33"...

I tried a mates 285 and it rubbed like mad just coming off garage ramp? How are yours not rubbing?

After several outings off road the panels seem to have beaten in to submission...

Ahh right thought that would be the case not sure if a 2" body lift would work on mine or not to try get 285's in with no rubbing?

where are you - bound to be peeps close by.

change yo usercp

Av got 2in lift on 33s and I cut my arches and put them flexi arches and 30mm spacers

I'm in Worcester area, and I have cut my arches and got flexi arches on but them 285's just rubbed with out going off road lol

Ya might need spacers..

extend the bump stops

I run 285's with a 4" lift (2" lift and 2" spacers) so its all suspension. I run plus 5 shocks on the rear. I also run 30mm wheel spacers and the arches are cut as far as they can be with 50mm arch extensions. I still hear them catching on the rear on a good full flex. I've no idea how ppl managed to run them with just a 2" lift, unless they don't use them offroad.

I run 37s with a 6" lift.