Jack_smart123
New Member
- Posts
- 1
- Location
- Newton aycliffe
Hi guys, first post! And yep it’s a suspension problem lol. I have a 2005 RRS 2.7 TDV6.
Car was working fine in ‘normal height’ soon as I tried to bring it up or down it would come up with a fault then the compressor would kick in to bring it back to ‘normal height’ , so I scanned it and it came with with ‘rear left valve’ , wheel off and had a look, took connector out and it had a bad wire, which fell it pieces while doing this. So I cut all wires and connected them back up to the block properly and plugged it back in.
started car, suspension fault again, now the fault is ‘control module’ won’t raise or lower, compressor won’t kick in it at all. Unplugged the valve connector and scanned again but it came up with control module fault again. Now it rides pretty stiff and suspension is pretty high. Not sure what to do now! Thanks for reading cheers. Jack.
Car was working fine in ‘normal height’ soon as I tried to bring it up or down it would come up with a fault then the compressor would kick in to bring it back to ‘normal height’ , so I scanned it and it came with with ‘rear left valve’ , wheel off and had a look, took connector out and it had a bad wire, which fell it pieces while doing this. So I cut all wires and connected them back up to the block properly and plugged it back in.
started car, suspension fault again, now the fault is ‘control module’ won’t raise or lower, compressor won’t kick in it at all. Unplugged the valve connector and scanned again but it came up with control module fault again. Now it rides pretty stiff and suspension is pretty high. Not sure what to do now! Thanks for reading cheers. Jack.
