Suspension and articulation concerns

Koiking · May 19, 2011

Can anyone help..
I have a 90 with a 2" lift and can't lift anymore as i won't be able to get it in the garage, but would like to no how to improve the articulation and shock travel?
Can any tell me if it's possible to put extend travel shocks on and which ones?
And which rear radius arms Rose jointed or just cranked?
And can I pack my props or do I need to change them to wide angle?
Any help would be greatly appreciated.

Cheers.

wiltshire landyman · May 19, 2011

lowerd shock mounts will do the job with your existing setup

khaos · May 19, 2011

I would do the opposite to WLM. Raised damper mounts and longer dampers would let the springs compress as much as they do now but they could also dislocate.

Boris113 · May 20, 2011

I got +2 springs and +5 shocks, seems to flex up pretty well

sadly all the pics i've taken since doing the lift have too much resolution or something so they won't upload

BearDy89 · May 20, 2011

Boris113 said:
I got +2 springs and +5 shocks, seems to flex up pretty well

sadly all the pics i've taken since doing the lift have too much resolution or something so they won't upload

Mihov image resizer.

Free image resizer make em smaller and upload them

The Mad Hat Man · May 20, 2011

or MS document imaging under MS Office tools, if yu got it.

Koiking · May 20, 2011

Think I'll may go down the +5 terafirma route with lowered rear mounts! Also looking at x eng rear Rose jointed arms, and has anybody tried x eng rear springs and cones?

Cheers me deers,,

Suspension and articulation concerns

Koiking

New Member

wiltshire landyman

I’m back

khaos

New Member

Boris113

Well-Known Member

BearDy89

Well-Known Member

The Mad Hat Man

Well-Known Member

Koiking

New Member

Similar threads