subwoofer where dinky seat was

Ive seen it on somebodys thread
Where they put a sub where the dinky seat used to be
Just looking for the thread and how it was built ect

Dicky not dinky surely???

Yess maybe uno what I ment haha

Found the thread http://www.landyzone.co.uk/lz/f8/auf_wiedersehen_pets-build-thread-206921-2.html

might have to have a go at this

I do not know how relevant it is, but if you have never done an ICE instal before, a copy of Haynes I.C.E https://www.google.co.uk/url?sa=t&r...xdxNd4jwImH9e2k1A&sig2=GNR_3Z8O-NvTx9iRBFxm1w

Is worth every penny.

I used to do a lot of SPL installs and this book was a godsend when I started.
Lots of neat little tips and tricks to do a good job.
One thing I would recommend if you are putting a Sub in a Disco is use Sound deadening, they rattle like mad!

Hope it may be of some help

Shirl

I already have a twin 12inch 1800w system but its just in a box in the boot using alot off space
Just think its a wise idea to put them in place off the dicky seats
Am familiar with sub electrics ect just not the best with woodwork
But I think ive found what I need in his thread just needed a refresh on it thats all

What page was it in his thread?

I've got a big ass sub I'm thinking of fitting

Depends how you have it set up I hace mine on I think 40posts per page and think it was 2 or 3
Its only in the first few pages

Subs Photos by auf_wiedersehen_pet | Photobucket

Might be useful.

Ahh so it's just the front and top not a full box and you used the lower seat brackets too,good thinking batman.

Ill try and copy it but I'm bound to cock it up lol

Nice one rob !

Quick question the amps under the seat why there?
Take it you have a longgg speaker wires going to the subs now
What thickness of would did you use ? Cheers

Got my amp bolted onto the rear door, as I have replaced the normal subs for better versions and just used the box and spaces that were there (although I did need to make the holes bigger in the door to accommodate the new subs

Also replaced the small rear pillar speakers for nice 6x9's too

Well I have a plan for my sleeping / storage platform
Its all measured out ect juat need the would
Doing it all in 18mm ply

thought you were getting shot of the disco, or has plans now changed?

or did I just misread someone's elses post?

flatline said:

Ahh so it's just the front and top not a full box and you used the lower seat brackets too,good thinking batman.

Ill try and copy it but I'm bound to cock it up lol

Click to expand...

And the top mounts too.

chrisyleigh said:

Quick question the amps under the seat why there?
Take it you have a longgg speaker wires going to the subs now
What thickness of would did you use ? Cheers

Click to expand...

Historical - the 250w was the original, now the 500w (bloody tight squeeze) sits there. All of the wires were in place already.

StuRox said:

or did I just misread someone's elses post?

Click to expand...

Was me yer I was gona sell bike n disco n get a 110 but
Missis got me some new leathers and after a spirited ride im keeping bike so discos staying lol