stuck hub!! please help!!!

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
C

chocolandy1

New Member
Posts
48
hi

gone to change a wheel bearing today on the back driver side and the bearing has totaly collapsed, taken all the bolts holding it all on and now i cant get the hub off!

been trying to pull and yank on it all morning, ive put the wheel back on and tried kicking it as hard as i can from under the truck but still cant budge it.

has any1 got any ideas as im sitting out in the rain and not getting anywere.

cheers guys
 
what bolts has it taken out?!?!

to get to the bearing you undo the big nuts and then pull the hub out... there's no bolts?
 
[JP];1663479 said:
what bolts has it taken out?!?!

to get to the bearing you undo the big nuts and then pull the hub out... there's no bolts?
Click to expand...


the half shaft is out, locking nut on the hub off, washer off, the next nut off. the hub is shaking but it wont come off theresn nothing else holding it on it just wont slip off???
 
just wack it, there's nothing holding it.

sometimes they can be a pain to get off, usually the hub comes out flying and the oil seal stays in place
 
You must log in or register to reply here.

Similar threads

I
Beeper refuses to shut up
Replies
5
Views
399
ironhorse
I
M
Disc 3 2007 TDV6 Engine rattle (tinkling type of rattle like a small chain rattling)
Replies
5
Views
367
lynall
L
dag019
Front hub differences
Replies
6
Views
686
dag019
dag019
A
New Disco Help ! :(
Replies
11
Views
983
Abcdescott
A
J
Stuck Momo steering wheel
2
Replies
38
Views
2K
jwrw
J
Back
Top