Stub Axle Bolts

border

Well-Known Member

Posts

3,517

Location

North East. UK

• Sep 28, 2018

• #1

Just about ready to put Backing Plates back on Salisbury rear axle,
Probably another stupid question but can I use these bolts in photo ?
Ones on top are the original that were in but I have a few of these new ones on the bottom, I know they are slightly longer but they are threaded all the way will it make any diference ??
Thanks

 

Attachments

• 
  IMG_2205.JPG

  405.7 KB · Views: 137
• 
  IMG_2168.JPG

  296.7 KB · Views: 146

jamesmartin

Well-Known Member

Posts

91,879

Location

louth lincs

• Sep 28, 2018

• #2

border said:

Just about ready to put Backing Plates back on Salisbury rear axle,
Probably another stupid question but can I use these bolts in photo ?
Ones on top are the original that were in but I have a few of these new ones on the bottom, I know they are slightly longer but they are threaded all the way will it make any diference ??
Thanks

Click to expand...

i wouldnt use the set screws use the proper bolts,the shank acts as a dowel

 

Flossie

Well-Known Member

Posts

11,053

Location

Shropshire

• Sep 28, 2018

• #3

I'd say no.
Others may disagree.

 

border

Well-Known Member

Posts

3,517

Location

North East. UK

• Sep 28, 2018

• #4

Thanks will use Original ones.

 

border

Well-Known Member

Posts

3,517

Location

North East. UK

• Sep 28, 2018

• #5

Are these the correct gaskets for mine which is 1987 110 Salisbury axle ?? https://www.lrdirect.com/Parts-by-Model/Defender-Parts/Axle-Rear/Drive-Shafts-Rear/FTC3649-Gasket/
Paddocks don't stock them,

 

jamesmartin

Well-Known Member

Posts

91,879

Location

louth lincs

• Sep 28, 2018

• #6

yes ftc3649

 

border

Well-Known Member

Posts

3,517

Location

North East. UK

• Sep 28, 2018

• #7

jamesmartin said:

yes ftc3649

Click to expand...

Thanks James should be able to get them from my local dealer.

 

border

Well-Known Member

Posts

3,517

Location

North East. UK

• Sep 28, 2018

• #8

Just another quick one, should I use gasket sealer with these paper gaskets are just use them on there own??

 

jamesmartin

Well-Known Member

Posts

91,879

Location

louth lincs

• Sep 28, 2018

• #9

border said:

Just another quick one, should I use gasket sealer with these paper gaskets are just use them on there own??

Click to expand...

a very little to hold them in place and let dry for 5mins or so, too much and they will spilt

 

border

Well-Known Member

Posts

3,517

Location

North East. UK

• Sep 28, 2018

• #10

jamesmartin said:

a very little to hold them in place and let dry for 5mins or so, too much and they will spilt

Click to expand...

Thanks Again