Co-Pang-Yang
Well-Known Member
- Posts
- 2,930
- Location
- Colchester, Essex
Hi all.
For the last 6 months of ownership my Landy has only ever had a working drivers window.
Decided to have a little play with the bent/broken motors i removed from the other doors. Got one to work on the NSR but now lost the bar that connects it to the window.
Other two arms are broken and not sure if there any power going to the OSR motor.
Picked up a set of new motors off a mate who was breaking a 300tdi (same as mine) but when i got them the arms were a different size and the wiring didn't fit.
This is a broken arm and motor i removed from my truck:
And this is what came out of my mates 300tdi:
Bit confused as to why there different.
Checked my window ecu and all the solder joints seen to be fine and i've replaced the 4 switches in the centre console panel.
Does anyone know where i can get the shorter arms in the first pic so that i can fit them too my motors?
Just getting annoying now.
Cheers Chris.
For the last 6 months of ownership my Landy has only ever had a working drivers window.
Decided to have a little play with the bent/broken motors i removed from the other doors. Got one to work on the NSR but now lost the bar that connects it to the window.
Other two arms are broken and not sure if there any power going to the OSR motor.
Picked up a set of new motors off a mate who was breaking a 300tdi (same as mine) but when i got them the arms were a different size and the wiring didn't fit.
This is a broken arm and motor i removed from my truck:
And this is what came out of my mates 300tdi:
Bit confused as to why there different.
Checked my window ecu and all the solder joints seen to be fine and i've replaced the 4 switches in the centre console panel.
Does anyone know where i can get the shorter arms in the first pic so that i can fit them too my motors?
Just getting annoying now.
Cheers Chris.