A bit deer. Can you recommend a recon supplier?
The box has to be centered for tightening the adjuster ,on full lock either way you will have play ,it's normal but as long as there is no play when centered should be ok
When I adjusted out play at center with front wheels hanging the center was the first to bind. Although I had just replaced upper and lower ball joints both sides and the new ones were alarmingly stiff (gone now mostly, that was a terribly combination!). The column does have a tiny bit of play but only perhaps 1/4 the play of the box.
Someone said about drop arm bearing but wasn't sure. Is that a possible failure point?
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!